Alternatives and similar repositories for open-dynamic-robot-initiative.github.io

Users that are interested in open-dynamic-robot-initiative.github.io are comparing it to the libraries listed below

• adham-elarabawy / open-quadruped
  An open-source 3D-printed quadrupedal robot. Intuitive gait generation through 12-DOF Bezier Curves. Full 6-axis body pose manipulation. …
  ☆417Updated 10 months ago
• open-dynamic-robot-initiative / master-board
  Hardware and Firmware of the Solo Quadruped Master Board
  ☆125Updated last month
• miguelasd688 / 4-legged-robot-model
  ☆254Updated 3 years ago
• open-dynamic-robot-initiative / open-motor-driver-initiative
  Open-source drive for brushless motors, following the open dynamic robot initiative
  ☆97Updated 3 months ago
• NimbRo / nimbro-op2
  2017 NimbRo-OP2 hardware release
  ☆54Updated 6 years ago
• popi-mkx3 / popi_project
  Here is everything you need to know about POPI, our open-source quadruped robot. If you want to check the videos we will release about it…
  ☆110Updated 3 years ago
• chvmp / robots
  Collection of quadrupedal robots configured to work in CHAMP development framework
  ☆253Updated 10 months ago
• lnotspotl / notspot_sim_py
  This repository contains all the code and files needed to simulate the notspot quadrupedal robot using Gazebo and ROS.
  ☆126Updated 4 years ago
• zlingkang / quadruped_9g
  A ROS node that describes a quadruped robot using URDF
  ☆84Updated 7 years ago
• mike4192 / spot_micro_kinematics_python
  A python library for kinematic operations on a spot micro quadruped
  ☆38Updated 2 years ago
• ger01d / kinematic-model-opencat
  Inverse kinematic model of quadruped OpenCat robots - Nybble and Bittle.
  ☆47Updated 3 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆80Updated last year
• yanshil / Fusion2PyBullet
  ☆70Updated 2 years ago
• alexandrospetkos / quad
  Four Legged robot design
  ☆85Updated last year
• stephane-caron / lipm_walking_controller
  Walking controller for humanoid robots based on inverted pendulum tracking
  ☆249Updated last year
• RoboDesignLab / HOPPY-Project
  HOPPY: An open-source and low-cost kit for dynamic robotics education
  ☆60Updated 4 years ago
• grablab / openhand-hardware
  CAD files for the OpenHand hand designs
  ☆171Updated 3 months ago
• csiro-robotics / syropod_highlevel_controller
  OpenSHC: A Versatile Multilegged Robot Controller
  ☆170Updated 4 years ago
• DarrenLevine / TipTap
  A 3d-printed bipedal robot. A low-cost desktop option for semi-direct drive walking research.
  ☆60Updated 4 years ago
• KevinOchs / hexapod_ros
  ROS Hexapod stack with functioning 2D and 3D mapping.
  ☆125Updated 6 years ago
• chvmp / champ_setup_assistant
  CHAMP Package Config Generator
  ☆90Updated 2 years ago
• leggedrobotics / xpp
  Visualization of Motions for Legged Robots in ros-rviz
  ☆333Updated 3 years ago
• Derek-TH-Wang / quadruped_ctrl
  MIT mini cheetah quadruped robot simulated in pybullet environment using ros.
  ☆342Updated 3 years ago
• open-dynamic-robot-initiative / robot_properties_solo
  ☆42Updated 2 years ago
• igusGmbH / HumanoidOpenPlatform
  Evolutionary leap for humanoid robots
  ☆29Updated 9 years ago
• leggedrobotics / free_gait
  An Architecture for the Versatile Control of Legged Robots
  ☆430Updated 5 years ago
• ReactRobotics / DogBotV4
  ☆34Updated 5 years ago
• dfki-ric-underactuated-lab / mini-cheetah-tmotor-python-can
  Python Motor Driver for Mini-Cheetah based Actuators: T-Motor AK80-6/AK80-9 using SocketCAN Interface
  ☆41Updated 2 years ago
• reubenstr / zuko
  A quadruped robot dog!
  ☆42Updated 3 years ago
• mjbots / quad
  quad A1 robot software and hardware
  ☆80Updated 3 months ago