giusenso / Ball-Balancing-PID-SystemLinks
Ball Balancing PID System: control of a 2 axis platform for ball stabilization w/ visual servoing.
☆46Updated 5 years ago
Alternatives and similar repositories for Ball-Balancing-PID-System
Users that are interested in Ball-Balancing-PID-System are comparing it to the libraries listed below
Sorting:
- Building self-balancing robot using LQR controller☆19Updated 11 months ago
- Self-balancing robot analysis and LQG optimal controller design with MATLAB Simulink and Simscape Multibody☆28Updated last year
- Control an inverted pendulum (Segway robot) with an Arduino & RaspberryPi☆26Updated 2 years ago
- Hardware and Firmware of the Solo Quadruped Master Board☆125Updated last month
- ODrive driver for ros2_control☆317Updated 2 years ago
- Control algorithms for a self balancing robot (two wheeled inverted pendulum) using ROS2☆53Updated 10 months ago
- Python Motor Driver for Mini-Cheetah based Actuators: T-Motor AK80-6/AK80-9 using SocketCAN Interface☆41Updated 2 years ago
- Here is everything you need to know about POPI, our open-source quadruped robot. If you want to check the videos we will release about it…☆110Updated 4 years ago
- MecanumWheelRobot based on LIDAR positioning system with Kalman Filter. Arduino + Raspberry + Matlab GUI control using ROS.☆30Updated 3 years ago
- MOCO通用四足机器人控制器教程☆118Updated 4 years ago
- 12-DOF Quadruped Robot☆35Updated 3 years ago
- Quadruped robot model with electrical actuation, including gait analysis and design workflow.☆32Updated 10 months ago
- MIT Mini Cheetah Implementation in ROS☆33Updated 4 years ago
- The Stewart Platform simulation is a 3D model of a 6DOF robotic mechanism consisting of 6 linear actuators. It is used for motion control…☆68Updated 2 years ago
- LQR, MPC and DRL approaches to control the Furuta pendulum.☆55Updated last month
- This repository uses C++ to implement a fuzzy PID controller to automatically tune PID parameters Kp,Ki and Kd.☆105Updated 4 years ago
- quadrupedal robot simulation☆21Updated 6 years ago
- Kinematics, Dynamics, Trajectory planning and Control of a 4 degrees of freedom robotic arm with matlab robotic toolbox☆83Updated 6 years ago
- A ROS node that describes a quadruped robot using URDF☆84Updated 7 years ago
- Reaction wheel inverted pendulum project based on the Arduino Simple FOC library and SimpleFOC shied.☆143Updated last year
- Open source quadruped with feet sensor.☆48Updated 3 years ago
- A python script for controlling the moteus r4.3 using the canFD adapter☆26Updated 4 years ago
- Simulating a Stewart platform in Gazebo using a plugin to allow control of a closed loop manipulator with ROS.☆119Updated 6 years ago
- A library for state space feedback control on Arduino☆79Updated 4 years ago
- ROS 2 based robot learning platform☆192Updated 3 years ago
- quad A1 robot software and hardware☆85Updated 7 months ago
- MATLAB and Simulink files for modeling and simulation of ROBOTIS OpenManipulator☆46Updated 3 weeks ago
- robot actuator☆32Updated 7 years ago
- Example of how to setup micro-ROS on any STM32 microcontroller☆105Updated 2 years ago
- A quadruped robot dog!☆42Updated 3 years ago