aarondls / overleapLinks
Overleap is an open-source 2 DOF robotic leg that can jump and hop in a circle.
☆27Updated 4 years ago
Alternatives and similar repositories for overleap
Users that are interested in overleap are comparing it to the libraries listed below
Sorting:
- 12-DOF Quadruped Robot☆35Updated 3 years ago
- A python script for controlling the moteus r4.3 using the canFD adapter☆26Updated 4 years ago
- ☆43Updated last week
- This code is outdated. Please check https://github.com/SovGVD/esp32-robot-dog-code☆30Updated 5 years ago
- Hardware and Firmware of the Solo Quadruped Master Board☆125Updated last month
- ☆76Updated 4 years ago
- Analytical trapezoidal motion generator in Arduino and Matlab☆56Updated 3 years ago
- A 3d-printed bipedal robot. A low-cost desktop option for semi-direct drive walking research.☆61Updated 5 years ago
- Open-source drive for brushless motors, following the open dynamic robot initiative☆100Updated last month
- ☆23Updated 5 years ago
- Brushless-based Robotics actuator.☆17Updated 4 years ago
- Simple balancing hoverboard robot☆51Updated 5 months ago
- This repository is dedicated to studying the different trajectory planning methods (theory + practical)☆17Updated last year
- Arduino Forward and Inverse Kinematics Library for Delta robot☆47Updated last year
- mini cheetah power supply design files☆19Updated 5 years ago
- S_Drive is small bldc driver based on L6234 Three phase motor driver.☆43Updated last year
- Python Motor Driver for Mini-Cheetah based Actuators: T-Motor AK80-6/AK80-9 using SocketCAN Interface☆41Updated 2 years ago
- Open source quadruped with feet sensor.☆48Updated 3 years ago
- A ROS node that describes a quadruped robot using URDF☆84Updated 7 years ago
- Tests on BLCD controller to understand robotic articulation design☆16Updated 4 years ago
- ☆60Updated 7 years ago
- Smarter Micro Servo (SMS) MOD☆22Updated 3 years ago
- Hardware and Software for an Open Source Robotic Leg☆80Updated 2 years ago
- DIY project of a quadruped robot as a exercise for programming.☆22Updated 5 years ago
- Control an inverted pendulum (Segway robot) with an Arduino & RaspberryPi☆26Updated 2 years ago
- Low-cost 3D printed force-torque sensors, including ROS drivers, CAD designs, and Arduino firmware.☆37Updated 5 years ago
- Robotic quadruped☆45Updated 7 years ago
- WIP SimpleFoc running Dynamixel Protocol☆13Updated 3 years ago
- ☆31Updated 4 years ago
- SpryDrive is an affordable actuator based on the quasi-direct drive (QDD) scheme. It is composed of a brushless outrunner motor, a low-co…☆39Updated 4 years ago