Alternatives and similar repositories for SpotMicro_ESP32

Users that are interested in SpotMicro_ESP32 are comparing it to the libraries listed below

• PingguSoft / esp32_quadruped
  quadrupedal robot using esp32
  ☆53Updated 11 months ago
• cguweb-com / Arduino-Projects
  ☆147Updated last year
• michaelkubina / SpotMicroESP32
  My take on a SpotMicro with an optimized design for supportfree 3D-printing. It utilizes an ESP32-DevKitC for the low-level control of th…
  ☆359Updated 11 months ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆56Updated 3 years ago
• avbotics / Spot-Micro-Control-and-Animation
  Inverse Kinematics based control and animation of Spotmicro developped in Python for Raspeberry Pi
  ☆135Updated 4 years ago
• lukasdeem / Rover-Project
  ☆92Updated last year
• alexandrospetkos / quad
  Four Legged robot design
  ☆89Updated last year
• aaedmusa / TOPS
  TOPS (Traverser of Planar Surfaces) or "SPOT" backwards is a 3D printed Open Source quadrupedal robot
  ☆282Updated 2 years ago
• XRobots / ROSremote
  ☆35Updated 3 years ago
• SovGVD / esp32-robot-dog-code
  WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories
  ☆136Updated 3 years ago
• fuwei007 / Navbot-EN01
  ☆129Updated last week
• raspibotics / MABEL
  MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.
  ☆182Updated 5 years ago
• SovGVD / esp32-robot-dog
  This code is outdated. Please check https://github.com/SovGVD/esp32-robot-dog-code
  ☆30Updated 5 years ago
• Jerome-Graves / yertle
  A 3D Printed Quadrupedal Robot for Locomotion Research.
  ☆123Updated 3 years ago
• cholan2100 / ceasar
  ☆18Updated 4 years ago
• KoshiroRobot / Ball-Balancing-Robot
  Ball Balance Robot Parts File and Program
  ☆204Updated 11 months ago
• makerbase-motor / MKS-ESP32FOC
  ☆55Updated 11 months ago
• gouldpa / Triple-Cycloidal-Robot-Arm-Proto-2
  ☆23Updated 5 years ago
• jkirsons / stealth-controller
  ☆91Updated 4 years ago
• GeorgeChiou / MiniPlan-V6
  MiniPlan V6
  ☆30Updated 4 years ago
• byDagor / Janus-Controller
  The Janus Controller is a Brushless motor driver with an on-board magnetic encoder, a three-phase MOSFET driver, three MOSFET half-bridge…
  ☆129Updated 4 years ago
• CGrassin / 3d_lidar
  This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.
  ☆75Updated 2 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆51Updated 6 years ago
• aaedmusa / 3D-Printed-Robot-Dog
  This is a 12 DOF 3D printed quadrupedal robot that I designed. It uses 12 servo motors, a Polulu maestro servo controller, and a Teensy 4…
  ☆79Updated 2 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆80Updated 2 years ago
• JeongSeoJin / Robotic_Actuators
  ☆68Updated last week
• EricYufengWu / q8bot
  Q8 Robot
  ☆179Updated this week
• remrc / Self-Balancing-Bike
  ☆46Updated 2 years ago
• hoverboard-robotics / hoverboard-firmware-hack-FOC
  With Field Oriented Control (FOC)
  ☆52Updated 2 years ago
• gouldpa / ESP-32-Brushless
  ☆29Updated 3 years ago