elpimous / yellow_robotLinks
a quadruped robot, inspired from OpenQuadripeder/microspotAi robot
☆17Updated 5 years ago
Alternatives and similar repositories for yellow_robot
Users that are interested in yellow_robot are comparing it to the libraries listed below
Sorting:
- Inverse Kinematics demystify☆13Updated 5 years ago
- ☆43Updated last month
- This code is outdated. Please check https://github.com/SovGVD/esp32-robot-dog-code☆30Updated 5 years ago
- Inverse Kinematics based control and animation of Spotmicro developped in Python for Raspeberry Pi☆135Updated 4 years ago
- A python script for controlling the moteus r4.3 using the canFD adapter☆27Updated 4 years ago
- DIY project of a quadruped robot as a exercise for programming.☆22Updated 5 years ago
- Brushless-based Robotics actuator.☆17Updated 4 years ago
- Robotic quadruped☆45Updated 7 years ago
- quad A1 robot software and hardware☆86Updated 8 months ago
- Open source quadruped with feet sensor.☆49Updated 3 years ago
- A quadruped robot dog!☆43Updated 3 years ago
- ☆40Updated 4 years ago
- ☆257Updated 3 years ago
- Overleap is an open-source 2 DOF robotic leg that can jump and hop in a circle.☆27Updated 4 years ago
- 12-DOF Quadruped Robot☆35Updated 3 years ago
- A ROS node that describes a quadruped robot using URDF☆84Updated 7 years ago
- ☆27Updated 6 years ago
- ROS driver for the MPU-6050 IMU☆21Updated 10 years ago
- Hardware and Software for an Open Source Robotic Leg☆80Updated 2 years ago
- WIP SimpleFoc running Dynamixel Protocol☆13Updated 3 years ago
- Simple balancing hoverboard robot☆51Updated 6 months ago
- Four Legged robot design☆91Updated 2 years ago
- Hardware and Firmware of the Solo Quadruped Master Board☆125Updated last week
- Software to drive a 3D printed robot with a SlushEngine or other motor controller driver☆27Updated 8 years ago
- ☆35Updated 6 years ago
- An open-source 3D-printed quadrupedal robot. Intuitive gait generation through 12-DOF Bezier Curves. Full 6-axis body pose manipulation. …☆437Updated last year
- New quadruped robot, working on UP Xtreme board, and BLDC motors from Mjbots☆27Updated 2 years ago
- Gripper, PCBs and ROS2 software for Six-Axis Robot Arm WE-R2.4 from LoboCNC☆26Updated last year
- Smarter Micro Servo (SMS) MOD☆22Updated 3 years ago
- MABEL is a feature-packed, open-source, legged balancing robot based off of the Boston Dynamics Handle robot.☆182Updated 5 years ago