Alternatives and similar repositories for Phantom_Phoenix

Users that are interested in Phantom_Phoenix are comparing it to the libraries listed below

• KurtE / Arduino_Phoenix_Parts
  Lynxmotion Phoenix Program for Arduino split into libraries
  ☆260Updated 5 years ago
• tuuzdu / crab_project
  ROS hexapod robot on BeagleBone Black
  ☆100Updated 7 years ago
• elkayem / ZippyTheBalancingRobot
  A 3D printed balancing robot
  ☆73Updated 8 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆362Updated 3 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆80Updated last year
• LuSeKa / HoverBot
  Self-balancing robot using hoverboard hub motors
  ☆117Updated 3 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆52Updated 3 years ago
• maximkulkin / lewansoul-lx16a
  Library and UI to configure and control LewanSoul LX-16A servos
  ☆65Updated 2 years ago
• SmallpTsai / 7688-hexapod
  An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685
  ☆74Updated 9 years ago
• maxosprojects / dobot-arm-CAD
  dobot-arm CAD files
  ☆65Updated 9 years ago
• antdroid-hexapod / antdroid
  Antdroid robot ROS repository
  ☆70Updated 8 years ago
• XRobots / RobotX
  All the things for RobotX
  ☆126Updated 7 years ago
• maxosprojects / open-dobot
  open-dobot - Open Firmware, Driver and SDK for Dobot Arm
  ☆142Updated 5 years ago
• KevinOchs / hexapod_ros
  ROS Hexapod stack with functioning 2D and 3D mapping.
  ☆125Updated 6 years ago
• uArm-Developer / UArmForArduino
  Arduino uArm Metal Library (uArm Metal only)
  ☆82Updated 6 years ago
• Toglefritz / Capers_II
  Capers II is a hexapod robot with three degrees of freedom per leg.
  ☆54Updated 7 years ago
• rppelayo / arduino-self-balancing-robot
  ☆73Updated last year
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 8 years ago
• regishsu / SpiderRobot
  ☆107Updated 9 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆46Updated 5 years ago
• glumb / mrc
  MicroPede robot controller 🤖🖥👾
  ☆100Updated 5 years ago
• neuroprod / InsectRobotSimulation
  hexapod
  ☆299Updated last year
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆113Updated 4 years ago
• getSurreal / XV_Lidar_Controller
  Arduino code for controlling the Neato XV Lidar
  ☆132Updated 4 years ago
• alexandrospetkos / quad
  Four Legged robot design
  ☆85Updated last year
• G-Levine / OpenTorque-Actuator
  OpenTorque Actuator: A powerful, compliant actuator for legged robotics.
  ☆349Updated 6 years ago
• jkirsons / stealth-controller
  ☆87Updated 4 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 7 years ago
• maartenweyn / SpotMicro_ESP32
  ☆41Updated 4 years ago
• Chris-Annin / Annin-Robot-Project
  6 axis stepper motor robot
  ☆111Updated 7 years ago