Alternatives and similar repositories for Hexapod-firmware

Users that are interested in Hexapod-firmware are comparing it to the libraries listed below

• Neumi / OpticalFlowA3080ArduinoProcessing
  Arduino and Processing code for an A3080 or ADNS3080 optical flow sensor
  ☆44Updated 2 years ago
• owenlab / PoorKame
  A cheaper version of MiniKame robot
  ☆16Updated 9 years ago
• airboxlab / Firmware
  Firmware for Open-source Indoor Air Quality Monitor
  ☆15Updated 10 years ago
• satnogs / satnogs-antennas
  SatNOGS Antennas
  ☆18Updated 7 years ago
• MarginallyClever / RotaryStewartPlatform
  Controls for a Rotary Stewart Platform hobby servos
  ☆16Updated 12 years ago
• IRNAS / UniversalUnipolarStepperController
  Universal controller for Unipolar stepper motors with encoders and end switches
  ☆12Updated 9 years ago
• firepick1 / firenodejs
  ☆12Updated 8 years ago
• fredlllll / FredUtil-Arduino
  snippets that were too small for their own library
  ☆37Updated 7 years ago
• arielnh56 / SonarI2C
  Arduino library supports many HC-SR04 sensors via I2C bus and hardware interrupt
  ☆27Updated 8 years ago
• nikant / espWiFi2eeprom
  esp8266 WiFi configuration to eeprom manager for Arduino IDE
  ☆20Updated 5 years ago
• vectrasoft / TrainableRoboticArm
  Baxter-like robotic arm that can be trained with human hands and a button press.
  ☆17Updated 3 years ago
• jpiat / arduino
  ☆115Updated 8 years ago
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆162Updated 9 years ago
• Blomdoft / fatKame
  Based on the miniKame, modifications to the body of the robot to allow more space, included a ultrasonic sensor. ESP8266 based quadruped …
  ☆29Updated 9 years ago
• jjrobots / StarTracker-Github
  The StarTRACKER is a DIY equatorial mounting for night sky photography. To take long-exposure astrophotos of objects that are too faint …
  ☆19Updated 10 years ago
• tricorderproject / arducordermini
  Arducorder Mini
  ☆128Updated 11 years ago
• subpos / subpos_node
  ☆24Updated 9 years ago
• Xevel / NXV11
  Hacking of the Neato XV-11 lidar
  ☆87Updated 5 years ago
• davidsanfal / miniloki
  Omnidirectional robotic platform
  ☆26Updated 9 years ago
• samuelpowell / CX10-FNRF
  Cheerson CX10 rate mode firmware with integrated RF
  ☆70Updated 7 years ago
• majinstudios / OpenChair
  ☆11Updated 9 years ago
• custom-build-robots / raspberry-pi-rc-car-controller
  This program is used to control a RC car with a Raspberry Pi and a PCA9685 servo controller.
  ☆13Updated 7 years ago
• sequoia-hope / Flutter-Scout
  A screwless 3D printed remote control car
  ☆115Updated 10 years ago
• cinderblock / 3-Phase-Driver
  Hardware design for a 3 Phase BLDC controller
  ☆56Updated 6 years ago
• squix78 / esp32-docker-buildbox
  Docker Buildbox for the ESP8266 WiFi chip
  ☆15Updated 10 years ago
• kanflo / espism
  A low cost ISM radio to wifi gateway
  ☆42Updated 6 years ago
• 4ndreas / MantisRover
  CAD files for the Mantis Rover Project - 3D printed mecanum wheel rover.
  ☆17Updated 6 years ago
• veter-team / a20
  Robot for PiWars competition
  ☆13Updated 10 years ago
• PulsedLight3D / LIDARLite_v2_Arduino_Library
  Arduino Library for interaction and learning about LIDAR-Lite v2 "Blue Label"
  ☆67Updated 7 years ago
• Rhoban / Metabot
  Open-source DIY parametric robot
  ☆69Updated 6 years ago