Toglefritz / Capers_IILinks
Capers II is a hexapod robot with three degrees of freedom per leg.
☆55Updated 7 years ago
Alternatives and similar repositories for Capers_II
Users that are interested in Capers_II are comparing it to the libraries listed below
Sorting:
- Hexy the Open-Source, Low-Cost Hexapod☆121Updated 6 years ago
- ☆36Updated 8 years ago
- Lynxmotion Phoenix code ported to Trossen PhantomX☆98Updated 8 years ago
- Code for a hexapod robot☆89Updated 6 years ago
- Code and STL files for small 18 servo hexapod.☆31Updated last year
- A 3D printed balancing robot☆73Updated 8 years ago
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆113Updated 4 years ago
- All the things for RobotX☆126Updated 7 years ago
- An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685☆76Updated 9 years ago
- Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.☆150Updated 11 years ago
- hexapod☆303Updated last year
- Antdroid robot ROS repository☆70Updated 8 years ago
- dobot-arm CAD files☆65Updated 9 years ago
- miniDog V2 CAD and Code☆63Updated 5 years ago
- Quadruped Robot for capstone project☆53Updated 3 years ago
- ☆34Updated 3 years ago
- ☆108Updated 9 years ago
- An open-source and fully hackable biped robot.☆160Updated 9 years ago
- ☆388Updated 4 years ago
- STL files and instructions for uStepper Robot Arm Rev 4☆70Updated 4 years ago
- Software for a 3D Printed Robot Arm☆134Updated last month
- G-code enabled firmware for Robot Arms☆33Updated 3 years ago
- ☆58Updated 7 years ago
- Build your own robot like a Ninja 🐱👤 This is the first emotional modular EdTech robot that can walk and roll!☆360Updated last year
- ☆22Updated 5 years ago
- ☆34Updated 4 months ago
- Micro Robot Arm with ESP32 and 28BY-48 12V steppers☆82Updated 5 years ago
- An open-source 3D-printable robotic arm☆148Updated 5 years ago
- This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.☆227Updated 4 years ago
- 3d printable Robot arm☆364Updated 4 years ago