KurtE / Arduino_Phoenix_PartsLinks
Lynxmotion Phoenix Program for Arduino split into libraries
☆260Updated 5 years ago
Alternatives and similar repositories for Arduino_Phoenix_Parts
Users that are interested in Arduino_Phoenix_Parts are comparing it to the libraries listed below
Sorting:
- Lynxmotion Phoenix code ported to Trossen PhantomX☆97Updated 8 years ago
- Hexapod v2 using Linkit 7697☆831Updated 6 years ago
- ESP8266 based quadruped with 8DOF and oscillator based gaits.☆409Updated 3 weeks ago
- WIP: ESP32 powered robot dog, quadruped robot. This is just code, hardware in the other repositories☆132Updated 3 years ago
- files for hexapod☆40Updated 5 years ago
- The world's first printable open-source humanoid, starter kit.☆308Updated 4 years ago
- Self balancing robot (Segway) based on modified/extended MultiWii 2.3 firmware.☆279Updated 4 years ago
- ☆107Updated 9 years ago
- Arduino Quadruped Robot, Spider Robot☆110Updated 9 years ago
- Software for a 3D Printed Robot Arm☆133Updated last week
- Something for robotic dog(using servo)☆83Updated 4 years ago
- 灯哥开源的,可用于搭载 Py-Apple Controller 控制器和 Py-Apple Dynamics 四足控制软件的机械结构项目。目前包含有两种构型的机器狗(串联腿/并连腿),均可完美适配现有开源程序。机械结构经过长时间生产认证,结构稳定,安装简易。☆117Updated 3 years ago
- Modular Arduino two wheel balancing robot based on gimbal BLDC motors and simplefoc library☆215Updated 11 months ago
- The Dagor Controller is a fully integrated tiny solution for brushless-based actuators with wireless capabilities.☆355Updated last week
- A desktop arm that can write and draw.☆50Updated 7 years ago
- An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685☆75Updated 9 years ago
- Four Legged robot design☆85Updated last year
- 灯哥开源的菠萝动力开源四足控制软件(Py-Apple Dynamics ),集成了开发四足机器人所需要必须基础库,是一套完整的全开源的四足机器人控制软件程序。☆220Updated 3 years ago
- OLDX_MocoMoco四足机器人开发平台 (每Star超过20更新 当日更新) Engilish Ver//github.com/golaced/OLDX-FC_QUADRUPED_QUADROTOR/tree/golaced-patch-1-en☆334Updated 3 years ago
- ☆255Updated 3 years ago
- ESP8266 project for Alpha 1S robot control.☆37Updated 6 years ago
- 这是菠萝狗四足机器人开源项目的分支,菠萝无刷系列开源四足机器人的专门仓库☆94Updated 3 years ago
- Hexapod in python.☆273Updated last year
- This is the open source project of the 6DoF robot arm based on stepper motors☆1,356Updated 5 years ago
- Fusion360 script for creating Cycloidal Drive sketch☆134Updated 3 years ago
- MOCO通用四足机器人控制器教程☆117Updated 4 years ago
- 菠萝万能控制器,是一个由灯哥开源的,基于Apache开源协议和ESP32主控芯片的低成本四足机器人控制器,控制器集成了全部四足机器人的必须硬件,完美支持 Py-Apple Dynamics 系列开源四足控制软件☆68Updated 3 years ago
- DIY Hexapod Robot☆275Updated last year
- Reaction wheel inverted pendulum project based on the Arduino Simple FOC library and SimpleFOC shied.☆135Updated last year
- 3-phase motor controller with integrated position sensor☆578Updated 3 years ago