mahowik / MahoRotorF4-DiscoveryLinks
Port of BaseFlight (with MultiWii 2.3 features) for STM32F4DISCOVERY board + GY-86 (mpu6050 + hmc5883 + ms5611) sensors board
☆15Updated 11 years ago
Alternatives and similar repositories for MahoRotorF4-Discovery
Users that are interested in MahoRotorF4-Discovery are comparing it to the libraries listed below
Sorting:
- ☆18Updated 3 years ago
- The Pololu AVR C/C++ Library makes it easier to get started programming your Orangutan Robot Controller or 3pi Robot.☆44Updated 2 years ago
- SAMD21G18A Sensor Board☆15Updated 9 years ago
- Added UART communication with Arduino Mega and Raspberry PI examples☆17Updated 6 years ago
- Solar MPPT Charger Implemented with BQ24650 MPS430 MCU☆19Updated 9 years ago
- Breakout (w/ RasPi pinout) for the A111 pulsed radar sensor.☆21Updated 4 years ago
- TensorFlow package for Cortex-M0-Plus, Cortex-M4, Cortex-M7, and Cortex-M55 CPUs.☆42Updated last year
- Crazyflie 2.0 nRF51 firmware☆67Updated last month
- PPM Encoder board http://paparazzi.enac.fr/wiki/ATmega_PPM_Encoder_Board☆31Updated 13 years ago
- CarTracker☆74Updated 8 months ago
- Improved OV5640 for Orange Pi (H3) / Nano Pi (H3) / Banana Pi M64 / Pine64+ / Nano Pi M2/M3 (Experimental)☆28Updated 8 years ago
- DEVKIT V1 projects, BLE, WiFi and Robotics.☆10Updated last week
- Firmware for Infinity brushless motor controllers☆26Updated 4 years ago
- A Space Vector Modulation (SVM) simulator for FOC analysis☆19Updated 7 years ago
- Open Source Hardware for STM32, complementing openstm32☆48Updated 11 years ago
- This library can be used for human thermal detection. There are examples to read temperature readings as quickly as possible and read the…☆15Updated 8 months ago
- STM32F103C8 demonstration blink program☆26Updated 9 years ago
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 3 years ago
- ☆27Updated 7 years ago
- A file and video-overlay logger for my BLDC motor controller☆51Updated 9 years ago
- Master control of robot using esp32 chip with openmv and tensorflow-lite support.☆11Updated 2 years ago
- I came up with a design for a 3D printed Dynamic Spin Balancer using an ESP32, an MPU6050 and a hall sensor to help balance out my wheels…☆13Updated 3 years ago
- STM32F429 with OV7670 through DCMI on 800x600 LCD☆10Updated 8 years ago
- ☆22Updated 5 years ago
- Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement☆41Updated 11 years ago
- The ICM20948 is the next IMU in the lineup from Invensense, following the MPU-9250☆17Updated 4 years ago
- Datasheets and KiCad project files for the Crazyflie electronics design.☆61Updated 9 years ago
- ☆24Updated 4 years ago
- Image compilation for Lorawan gateway on OpenWrt☆21Updated 6 years ago
- Kalam32 ESP32 IoT platform☆12Updated 7 years ago