Alternatives and similar repositories for Hexapod

Users that are interested in Hexapod are comparing it to the libraries listed below

• Toglefritz / Capers_II
  Capers II is a hexapod robot with three degrees of freedom per leg.
  ☆56Updated 7 years ago
• antdroid-hexapod / antdroid
  Antdroid robot ROS repository
  ☆70Updated 8 years ago
• SmallpTsai / 7688-hexapod
  An 18 DOF Hexpod project using LinkIt Smart 7688 + PCA9685
  ☆76Updated 9 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆151Updated 11 years ago
• mithi / hexy
  Code for a hexapod robot
  ☆91Updated 6 years ago
• KurtE / Raspberry_Pi
  Code I ported to run on Raspberry Pi including Phoenix code
  ☆35Updated 7 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆114Updated 5 years ago
• rppelayo / arduino-self-balancing-robot
  ☆76Updated last year
• OperationSmallKat / SmallKat_V2
  ☆34Updated 6 months ago
• XRobots / RobotX
  All the things for RobotX
  ☆128Updated 7 years ago
• JavierIH / zowi
  An open-source and fully hackable biped robot.
  ☆161Updated 9 years ago
• regishsu / SpiderRobot
  ☆110Updated 9 years ago
• davidsanfal / miniloki
  Omnidirectional robotic platform
  ☆26Updated 9 years ago
• ArcBotics / Hexy
  Hexy the Open-Source, Low-Cost Hexapod
  ☆121Updated 6 years ago
• bikerglen / robot-arm-v01
  ☆58Updated 7 years ago
• yorkhackspace / meArm
  Inverse kinematics control library for Phenoptix meArm
  ☆122Updated 5 years ago
• KurtE / Phantom_Phoenix
  Lynxmotion Phoenix code ported to Trossen PhantomX
  ☆100Updated 8 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 6 years ago
• AliShug / EvoArm
  An open-source 3D-printable robotic arm
  ☆151Updated 6 years ago
• 4ndreas / Mantis-Robot-Arm
  3d printable Robot arm
  ☆41Updated 8 years ago
• glumb / mrc
  MicroPede robot controller 🤖🖥👾
  ☆102Updated 6 years ago
• JackDemeter / quadruped-robot
  Quadruped Robot for capstone project
  ☆54Updated 3 years ago
• Obijuan / ArduSnake
  Arduino modular snake robots library. Generate the locomotion of snake robots easily!
  ☆44Updated 10 years ago
• GearDownForWhat / BalanceBot
  The Stupid fast Servo powered balance bot
  ☆45Updated last year
• XRobots / PerformanceRobots
  ☆39Updated 5 years ago
• XRobots / ROSremote
  ☆35Updated 3 years ago
• uStepper / uStepper-RobotArm-Rev3
  uStepper Robot Arm STL files and instruction Revision 3
  ☆94Updated 7 years ago
• 4ndreas / BetaBots-Robot-Arm-Project
  3d printable Robot arm
  ☆365Updated 4 years ago
• chilipeppr / robot-actuator-esp32-v8
  This is the repo for the robot actuator v8 based on an ESP32 as the brains of each robot arm actuator.
  ☆230Updated 5 years ago
• plenprojectcompany / PLEN2
  The world's first printable open-source humanoid, starter kit.
  ☆317Updated 4 years ago