Alternatives and similar repositories for sump3

Users that are interested in sump3 are comparing it to the libraries listed below

• fjullien / migen_litex_tutorials
  ☆117Updated 2 years ago
• openXC7 / toolchain-installer
  Convenience script to install the nextpnr-xilinx toolchain for Kintex7, Artix7, Spartan7 and Zynq7
  ☆91Updated 6 months ago
• enjoy-digital / litex-acorn-baseboard
  LiteX development baseboards arround the SQRL Acorn.
  ☆72Updated 10 months ago
• smunaut / iCE40linux
  Gateware / Firmware / BuildRoot to run linux on iCE40 / iCEBreaker
  ☆103Updated 2 years ago
• openXC7 / demo-projects
  Demo projects for various Kintex FPGA boards
  ☆65Updated 7 months ago
• colognechip / gatemate_ila
  The ILA allows you to perform in-system debugging of your designs on the GateMate FPGA at runtime. All signals of your design inside the …
  ☆58Updated 2 months ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆45Updated 3 years ago
• amaranth-farm / amlib
  assorted library of utility cores for amaranth HDL
  ☆99Updated last year
• bl0x / learn-fpga-amaranth
  Code for Bruno Levy's learn-fpga tutorial written in Amaranth HDL
  ☆112Updated last year
• splinedrive / my_hdmi_device
  New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…
  ☆104Updated 4 months ago
• openXC7 / xc7k325t-blinky-nextpnr
  ☆45Updated 3 years ago
• meiniKi / FazyRV
  A minimal-area RISC-V core with a scalable data path to 1, 2, 4, or 8 bits and manifold variants.
  ☆111Updated last month
• litex-hub / litespi
  Small footprint and configurable SPI core
  ☆46Updated last month
• controlpaths / litefury_rp5
  Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1
  ☆37Updated last year
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated last year
• kbob / nmigen-examples
  I want to learn [n]Migen.
  ☆44Updated 5 years ago
• swetland / ethernet-pmod
  Ethernet PHY PMOD (Microchip LAN8720A PHY)
  ☆47Updated 3 years ago
• openXC7 / nextpnr-xilinx
  Experimental flows using nextpnr for Xilinx devices
  ☆54Updated last month
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆86Updated last year
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆62Updated 4 years ago
• ultraembedded / openlogicbit
  Open-source Logic Analyzer gateware for various FPGA dev boards/replacement gateware for commercially available logic analyzers.
  ☆159Updated 4 years ago
• ulixxe / usb_cdc
  Single/Multi-channel Full Speed USB interface for FPGA and ASIC designs
  ☆186Updated last year
• quartiq / bscan_spi_bitstreams
  FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.
  ☆57Updated 2 years ago
• ZipCPU / fftdemo
  A demonstration showing how several components can be compsed to build a simulated spectrogram
  ☆47Updated last year
• icebreaker-fpga / icebreaker-verilog-examples
  This repository contains small example designs that can be used with the open source icestorm flow.
  ☆155Updated 4 years ago
• FPGAwars / FLIX-V
  FLIX-V: FPGA, Linux and RISC-V
  ☆42Updated 2 years ago
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆27Updated 3 months ago
• lambdaconcept / lambdaUSB
  A configurable USB 2.0 device core
  ☆32Updated 5 years ago
• pergola-fpga / pergola
  Low-cost ECP5 FPGA development board
  ☆80Updated 5 years ago
• mattvenn / basic-ecp5-pcb
  Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
  ☆122Updated 4 years ago