Alternatives and similar repositories for schoko

Users that are interested in schoko are comparing it to the libraries listed below

• machdyne / sechzig
  Sechzig Compute Module
  ☆11Updated 7 months ago
• gregdavill / CH32V003-makefile-example
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs
  ☆16Updated 2 years ago
• folknology / BlackIceMx
  BlackIceMx - Core Module carrier with MixMods/Pmod interfaces
  ☆17Updated 5 years ago
• skerr92 / Oakdevtech_CircuitPython_IcePython
  A library for programming iCE40 FPGA from Lattice Semi
  ☆11Updated last year
• mattvenn / vga_clock_pcb
  Open source hardware down to the chip level!
  ☆30Updated 3 years ago
• dan-rodrigues / pico-hx
  PCB combining Raspberry Pi Pico and iCE40 FPGA
  ☆32Updated last year
• enjoy-digital / litex_rp2040_pmod_test
  Test of a RP2040 PMOD attached to a LiteX SoC.
  ☆25Updated last year
• SYZYGYfpga / pcb-templates
  Template PCB's for SYZYGY board designs
  ☆20Updated 2 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆26Updated 2 years ago
• hydrausb3 / wch-ch56x-bsp
  WCH CH56x BSP for HydraUSB3 v1 hardware
  ☆17Updated last year
• hydrausb3 / wch-ch56x-isp
  Simple WCH MCU tool to flash over usb (compatible with WCH CH569 & CH565)
  ☆12Updated 8 months ago
• rob-ng15 / Silice-Playground
  Programs for the FOMU, DE10NANO and ULX3S FPGA boards, written in Silice https://github.com/sylefeb/Silice
  ☆35Updated last year
• robtaylor / amaranth-awesome
  Awesome projects using the Amaranth HDL
  ☆13Updated 3 months ago
• Wren6991 / DVI-PMOD
  DVI PMOD adapter (HDMI connector)
  ☆28Updated 4 years ago
• JarrettR / FD-Autoplacer
  Force-directed component autoplacement for KiCad
  ☆29Updated 5 months ago
• machdyne / keks
  Keks Game Console
  ☆18Updated last year
• suarezvictor / litex_imgui_usb_demo
  Soft USB for LiteX
  ☆50Updated 2 years ago
• steieio / pico-dirty-blaster
  Collection of Raspberry Pi Pico board adapters for use with Pico-DirtyJTAG
  ☆13Updated 11 months ago
• sipeed / TangNano-1K-examples
  TangNano-1K-examples (GW1NZ-LV1)
  ☆19Updated 2 years ago
• pineapple-one / hardware-kicad
  ☆18Updated 3 years ago
• jonthomasson / SpartanMini
  A flexible, simple, yet powerful FPGA development board.
  ☆16Updated 7 years ago
• folknology / IceCore
  IceCore Ice40 HX based modular core
  ☆46Updated 4 years ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆28Updated 10 months ago
• arturo182 / kicad-library
  A repository with all my custom symbols for KiCad
  ☆21Updated 3 months ago
• tinyvision-ai-inc / pico-ice-sdk
  Firmware and software support for the pico-ice board
  ☆56Updated last week
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆42Updated 2 years ago
• ulixxe / usb_dfu
  Full Speed USB DFU interface for FPGA and ASIC designs
  ☆17Updated last year
• antmicro / gerber2blend
  Tool for exporting PCB fabrication (Gerber) files into Blender models.
  ☆13Updated last month
• PetteriAimonen / tem-cell
  DIY TEM cell design for EMC measurements
  ☆18Updated 7 months ago
• betrusted-io / gateware
  IP submodules, formatted for easier CI integration
  ☆29Updated last year