regymm / muzy
2-layer FPGA development board with ZYNQ 7010/7020 400-pin BGA.
☆19Updated last month
Related projects ⓘ
Alternatives and complementary repositories for muzy
- Test of a RP2040 PMOD attached to a LiteX SoC.☆24Updated last year
- Löwe FPGA Board☆12Updated last year
- snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support☆27Updated 4 months ago
- USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569☆22Updated last year
- New clean hdmi implementation for ulx3s, icestick, icoboard, arty7, colorlight i5 and blackicemx! With tmds encoding hacked down from dvi…☆92Updated last year
- Riegel Computer☆17Updated last year
- Experimental FPGA project for streaming two MIPI CSI camera streams to an HDMI monitor using a ULX3S FPGA board☆27Updated last year
- Open source Logic Analyzer based on LiteX SoC☆24Updated 2 months ago
- RP2040 MCU based PMOD☆19Updated last year
- Adapter to use Colorlight i5/i9 FPGA boards in a QMTech board form factor☆17Updated 2 years ago
- Basic Pong you can extend with rotary, sound, vga generator and autopilot☆12Updated 3 years ago
- DVI PMOD adapter (HDMI connector)☆28Updated 3 years ago
- Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards☆46Updated last year
- Gateware to communicate with the high speed parallel interface (HSPI) of the CH569 with a FPGA☆27Updated 2 years ago
- Siglent SDS1x0xX-E FPGA bitstreams☆40Updated last year
- ☆22Updated 4 years ago
- A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.☆41Updated 2 years ago
- Ethernet PHY PMOD (Microchip LAN8720A PHY)☆38Updated 2 years ago
- LiteX based FPGA gateware for Thunderscope.☆22Updated 9 months ago
- iCE40UP5K in an Adafruit Feather form factor☆22Updated 2 years ago
- FLIX-V: FPGA, Linux and RISC-V☆41Updated last year
- ECP5 FPGA in an "S7 Mini" form factor☆77Updated 3 years ago
- WCH CH569 SerDes Reverse Engineering☆25Updated 2 years ago
- Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K☆23Updated 2 years ago
- CRUVI Standard Specifications☆17Updated 6 months ago
- Conecting the Litefury FPGA accelerator to Raspberry Pi 5 over PCIe gen2 x1☆25Updated 9 months ago
- Tiny tips for Colorlight i5 FPGA board☆55Updated 3 years ago
- Repository for the rp2040_pmod board from controlpaths devices.☆18Updated 10 months ago
- DVI video out example for prjtrellis☆16Updated 5 years ago
- Low-cost ECP5 FPGA development board☆76Updated 4 years ago