Alternatives and similar repositories for toygpu

Users that are interested in toygpu are comparing it to the libraries listed below

• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆78Updated 2 months ago
• nullobject / sdram-fpga
  A FPGA core for a simple SDRAM controller.
  ☆120Updated 3 years ago
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆91Updated 7 years ago
• icebreaker-fpga / icebreaker-verilog-examples
  This repository contains small example designs that can be used with the open source icestorm flow.
  ☆149Updated 3 years ago
• gtjennings1 / UPDuino-LH154Q01-Display
  Design to connect Lattice Ultraplus FPGA to LH154Q01 Display
  ☆28Updated 7 years ago
• hdl-util / sdram-controller
  Generic FPGA SDRAM controller, originally made for AS4C4M16SA
  ☆80Updated 4 years ago
• davidthings / tinyfpga_bx_usbserial
  USB Serial on the TinyFPGA BX
  ☆137Updated 4 years ago
• ironsteel / nes_ecp5
  NES FPGA implementation synthesized for the ulx3s ecp5 based fpga board
  ☆38Updated 2 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆59Updated 2 years ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆61Updated 6 years ago
• lawrie / tiny_usb_examples
  Using the TinyFPGA BX USB code in user designs
  ☆51Updated 6 years ago
• blackmesalabs / sump2
  open-source logic analyzer for FPGAs
  ☆98Updated 6 years ago
• mattvenn / basic-ecp5-pcb
  Reference design for Lattice ECP5 FPGA. Featuring Raspberry Pi interface and 6 PMODs
  ☆115Updated 4 years ago
• gregdavill / ecpprog
  Programmer for the Lattice ECP5 series, making use of FTDI based adaptors
  ☆91Updated 9 months ago
• no2fpga / no2usb
  Nitro USB FPGA core
  ☆87Updated last year
• ulx3s / fpga-odysseus
  FPGA Odysseus with ULX3S
  ☆67Updated last year
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆41Updated 3 years ago
• abnoname / iceZ0mb1e
  FPGA 8-Bit TV80 SoC for Lattice iCE40 with complete open-source toolchain flow using yosys and SDCC
  ☆58Updated 2 years ago
• knielsen / ice40_viewer
  ☆61Updated last year
• RadionaOrg / ulx3s-links
  List of all links you can try with ULX3S
  ☆103Updated 3 years ago
• hdl4fpga / hdl4fpga
  VHDL library 4 FPGAs
  ☆181Updated this week
• ultraembedded / core_dvi_framebuffer
  Minimal DVI / HDMI Framebuffer
  ☆83Updated 5 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆68Updated 10 months ago
• ZipCPU / wbscope
  A wishbone controlled scope for FPGA's
  ☆83Updated last year
• m-labs / lm32
  LatticeMico32 soft processor
  ☆106Updated 10 years ago
• mystorm-org / BlackIce-II
  Software, Firmware and documentation for the myStorm BlackIce-II board
  ☆70Updated 4 years ago
• im-tomu / valentyusb
  FPGA USB stack written in LiteX
  ☆129Updated 3 years ago
• ZipCPU / openarty
  An Open Source configuration of the Arty platform
  ☆131Updated last year
• smunaut / doom_riscv
  Doom classic port to lightweight RISC‑V
  ☆94Updated 3 years ago
• cliffordwolf / icotools
  Tools and Examples for IcoBoard
  ☆80Updated 4 years ago