damienmaguire / BMW-i3-CCS
Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
☆46Updated last year
Alternatives and similar repositories for BMW-i3-CCS:
Users that are interested in BMW-i3-CCS are comparing it to the libraries listed below
- Collection of CAN logs from different electric vehicles☆30Updated 7 months ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆78Updated 4 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated last year
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆57Updated 7 months ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- SIMPBMS code for I3 Modules☆43Updated last year
- ESP32 Based Chademo implementation☆14Updated 7 months ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆41Updated 3 years ago
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆12Updated 10 years ago
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆70Updated 2 months ago
- Software for Damien Maguire's CHAdeMO controller☆20Updated 4 years ago
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆21Updated 3 years ago
- Software for correcting instrumentation on a battery "bruteforce" upgraded LEAF☆23Updated 4 years ago
- CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.☆31Updated 5 years ago
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 2 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- Reverse Engineering of the Tesla Model 3 charger and development of an open source control board☆30Updated 6 months ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆17Updated last month
- Retrieve battery diagnostic data from your smart electric drive EV.☆54Updated 2 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆58Updated last week
- leaf spline revers engineering☆13Updated 4 years ago
- STM32 with QCA7005 as CCS charge controller☆71Updated last month
- SimpBMS Documentation☆86Updated 2 years ago
- Can based decoding of VW bms data☆35Updated last year
- CAN Bus logger with SD card implemented using ChibiOS☆69Updated 6 years ago
- Information for how to add CCS to your LEAF, keeping it relevant for many years to come!☆76Updated last year