uhi22 / ccs32berta
ESP32 talks via SPI with QCA7005 PLC modem
☆20Updated last year
Alternatives and similar repositories for ccs32berta:
Users that are interested in ccs32berta are comparing it to the libraries listed below
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆24Updated last year
- STM32 with QCA7005 as CCS charge controller☆68Updated last month
- BelayBox reference hardware☆48Updated 5 months ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆74Updated last month
- The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.☆2Updated 3 months ago
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆19Updated last year
- Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3☆44Updated last year
- QCA7000 PLC Board☆11Updated 2 years ago
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆58Updated 2 months ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆39Updated 3 years ago
- ESP32 Based Chademo implementation☆15Updated 4 months ago
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆17Updated 2 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 10 months ago
- Collection of CAN logs from different electric vehicles☆29Updated 4 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- The community version of Josev - An Operating System for the V2G charging Stations☆129Updated last year
- ☆22Updated 9 years ago
- EDF R&D implementation of ISO 15118-20.☆53Updated last year
- STM32 firmware for the Yeti power board reference hardware☆16Updated 6 months ago
- An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communicati…☆93Updated 2 years ago
- Software for Damien Maguire's CHAdeMO controller☆19Updated 4 years ago
- Dissector for the V2G Protocols☆51Updated 4 months ago
- C++ implementation of the Open Charge Point Protocol☆104Updated this week
- ESP32 EVSE firmware☆81Updated last week
- cbExiGen - The V2GTP EXI codec generator for cbV2G☆38Updated 3 weeks ago
- Implementation of the ISO 15118 Communication Protocol (-2, -20, -8)☆191Updated this week
- Electric vehicle CCS charging investigations with Python☆163Updated this week
- Charging Station firmware for electric vehicles - OCPP 2.0.1. compliant☆21Updated 2 years ago
- Wireshark Plugin for viewing ISO15118 VSE elements in Beacon, Probe requests, and (re)association messages☆17Updated 5 years ago
- Imported from http://openv2g.sourceforge.net/ to manage I2SE's configuration and modifications.☆9Updated 2 years ago