Tom-evnut / BMWI3BMS
SIMPBMS code for I3 Modules
☆42Updated last year
Alternatives and similar repositories for BMWI3BMS:
Users that are interested in BMWI3BMS are comparing it to the libraries listed below
- SimpBMS Documentation☆86Updated 2 years ago
- Collection of CAN logs from different electric vehicles☆29Updated 6 months ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆60Updated 4 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- ☆40Updated last year
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 11 months ago
- Can based decoding of VW bms data☆35Updated 11 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆53Updated 5 months ago
- CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.☆31Updated 4 years ago
- leaf spline revers engineering☆12Updated 4 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆77Updated 2 months ago
- diy BMS version 4 for Nissan Leaf cells☆20Updated 3 years ago
- Reverse Engineering of the Tesla Model 3 charger and development of an open source control board☆29Updated 5 months ago
- ☆38Updated 3 years ago
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆67Updated 3 weeks ago
- Software for Damien Maguire's CHAdeMO controller☆20Updated 4 years ago
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 2 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆17Updated last week
- LEAF CAN bus message decoding with proper database files☆183Updated last month
- Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.☆32Updated last week
- SimpBMS Firmware for BMW Phev batteries 16s modules☆18Updated 10 months ago
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆11Updated 10 years ago
- esp32 Based can-bridge with webserver☆16Updated last year
- BMW CANbus gateway emulator & proxy☆17Updated 4 years ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆40Updated 3 years ago
- Retrieve battery diagnostic data from your smart electric drive EV.☆53Updated 2 years ago