Isaac96 / CHAdeMOSoftware
Software for Damien Maguire's CHAdeMO controller
☆20Updated 4 years ago
Alternatives and similar repositories for CHAdeMOSoftware:
Users that are interested in CHAdeMOSoftware are comparing it to the libraries listed below
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆40Updated 3 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated last year
- ESP32 Based Chademo implementation☆14Updated 5 months ago
- Collection of CAN logs from different electric vehicles☆30Updated 6 months ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆56Updated this week
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- leaf spline revers engineering☆12Updated 4 years ago
- ☆10Updated last year
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆20Updated 3 years ago
- Web interface for Huebner inverter☆34Updated 4 months ago
- Arduino projects for the Boxster☆20Updated 4 years ago
- Open Inverter - Alternative Web Interface☆31Updated 3 years ago
- Empty Openinverter project to start your own☆15Updated last year
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆11Updated 7 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆69Updated 5 years ago
- Nissan Leaf based EV conversions☆10Updated 2 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆117Updated 4 years ago
- STM32 with QCA7005 as CCS charge controller☆70Updated last week
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆17Updated 2 weeks ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆77Updated 3 months ago
- ☆16Updated 3 weeks ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Generalized Electric Vehicle Control Unit☆116Updated 2 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆15Updated 2 years ago
- Use openinverter hardware as an island (non-grid connected) inverter☆16Updated 4 years ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆24Updated last year