damienmaguire / VW-OnBoard-Charger
Hacking and reverse engineering of the VW Onboard AC chargers
☆14Updated last year
Related projects ⓘ
Alternatives and complementary repositories for VW-OnBoard-Charger
- Collection of CAN logs from different electric vehicles☆29Updated 2 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 7 months ago
- ESP32 Based Chademo implementation☆13Updated last month
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆62Updated last week
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆38Updated 3 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆58Updated 3 years ago
- A collection of DBC files☆16Updated 8 months ago
- Software for Damien Maguire's CHAdeMO controller☆18Updated 4 years ago
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆11Updated 10 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated 10 months ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆19Updated last year
- leaf spline revers engineering☆12Updated 4 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆14Updated 2 weeks ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆10Updated 4 years ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 3 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆19Updated 3 years ago
- 7th generation GEVCU source code☆21Updated 2 months ago
- Can Filter with STM32F105RBT Reverse Engeneering☆31Updated 2 years ago
- ☆34Updated 2 years ago
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 2 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆14Updated last year
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆17Updated 2 years ago
- Can based decoding of VW bms data☆34Updated 7 months ago
- ESP32 talks via SPI with QCA7005 PLC modem☆19Updated last year
- Volvo LIN bus reader☆86Updated 3 years ago
- SIMPBMS code for I3 Modules☆41Updated last year
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆53Updated 2 months ago
- BMW CANbus gateway emulator & proxy☆17Updated 3 years ago
- Hardware - CAN enabled IO board☆27Updated 2 months ago