Alternatives and similar repositories for SimpBMS:

Users that are interested in SimpBMS are comparing it to the libraries listed below

• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆43Updated last year
• Tom-evnut / TeslaBMSV2
  ☆40Updated last year
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆30Updated 7 months ago
• SunshadeCorp / can-service
  Simulate a BYD Battery-Box Premium HVS over CAN Bus to use a custom battery with your inverter. Controllable via MQTT.
  ☆32Updated last month
• jens18 / lgresu
  LG Resu 10 LV Monitor
  ☆29Updated 5 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆62Updated 4 years ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆11Updated 9 months ago
• Tom-evnut / VW-bms
  Can based decoding of VW bms data
  ☆35Updated last year
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆15Updated 2 years ago
• stuartpittaway / diyBMSv4Leaf
  diy BMS version 4 for Nissan Leaf cells
  ☆20Updated 4 years ago
• dalathegreat / Nissan-Leaf-Battery-to-OBD2
  An opensource solution for connecting OBD2 straight to the Nissan Leaf battery
  ☆57Updated 6 months ago
• collin80 / TeslaBMS
  ☆166Updated 7 years ago
• damienmaguire / VW-OnBoard-Charger
  Hacking and reverse engineering of the VW Onboard AC chargers
  ☆15Updated last year
• MyLab-odyssey / ED_BMSdiag
  Retrieve battery diagnostic data from your smart electric drive EV.
  ☆54Updated 2 years ago
• Sgw32 / BMSCtl
  ANT BMS (antBMS) control panel on C# with UART capability. I hacked protocol and reverse-engineered it.
  ☆22Updated 4 years ago
• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆32Updated last year
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆19Updated 4 years ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆11Updated last year
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆32Updated last year
• madsci1016 / SMAVenusDriver
  A driver to integrate SMA SunnyIsland inverters with Victron Venus OS
  ☆17Updated 2 months ago
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆78Updated 4 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆75Updated last year
• Isaac96 / EV-Code
  Arduino projects for the Boxster
  ☆20Updated 4 years ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆42Updated 3 years ago
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆175Updated last month
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆90Updated 4 months ago
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆12Updated last year
• Tom-evnut / VEcan
  Communicating with Victron energy products, also compatible with other inverters and solar equipement
  ☆19Updated 7 years ago
• 49thdiver / EV-Projects
  Nissan Leaf based EV conversions
  ☆10Updated 3 years ago