damienmaguire / MG-EV-ChargerLinks
Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
☆18Updated 2 weeks ago
Alternatives and similar repositories for MG-EV-Charger
Users that are interested in MG-EV-Charger are comparing it to the libraries listed below
Sorting:
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆12Updated 2 years ago
- Collection of CAN logs from different electric vehicles☆35Updated 11 months ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- ESP32 Based Chademo implementation☆17Updated 10 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆82Updated 2 months ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆45Updated 4 years ago
- ☆17Updated 4 months ago
- Software for Damien Maguire's CHAdeMO controller☆22Updated 4 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆18Updated last week
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆173Updated this week
- Generalized Electric Vehicle Control Unit☆118Updated 3 years ago
- Bootloader project to update for example STM32F107 / GD32F107 chips☆17Updated last year
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 4 months ago
- Source code and documentation for the CAN Logger 3, a project sponsored by the National Science Foundation (NSF) and National Motor Freig…☆20Updated last year
- leaf spline revers engineering☆14Updated 5 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆47Updated last year
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆12Updated 10 years ago
- STM32 with QCA7005 as CCS charge controller☆83Updated 3 weeks ago
- ☆42Updated 3 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 2 years ago
- CAN Bus Bridge / Smart Repeater☆37Updated 4 months ago
- Generalized Vehicle Control Unit for version 6 boards☆25Updated last year
- ☆23Updated 4 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆71Updated 6 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆121Updated 4 years ago
- BMW CANbus gateway emulator & proxy☆20Updated 4 years ago
- Information on the BMW E65 7 Series Powertrain CAN bus☆31Updated 7 years ago