jsphuebner / esp32-web-interfaceLinks
☆20Updated 9 months ago
Alternatives and similar repositories for esp32-web-interface
Users that are interested in esp32-web-interface are comparing it to the libraries listed below
Sorting:
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆14Updated 2 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- Monitor Canbus traffic☆133Updated 7 months ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆91Updated 6 months ago
- CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4☆28Updated 2 years ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- An ESP32 CAN 2.0B library☆74Updated 6 months ago
- A ESP32 based CAN interface for your webbrowser☆27Updated 4 years ago
- Collection of CAN logs from different electric vehicles☆39Updated last month
- Empty Openinverter project to start your own☆15Updated last year
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 5 months ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 8 months ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆59Updated 4 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆16Updated 2 years ago
- A ESP32 based interface between CAN-bus and IoT environments.☆44Updated 2 years ago
- ESP32 slcan compatible device☆103Updated 4 years ago
- ESP32 based CAN development board☆179Updated 3 years ago
- ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation☆19Updated 5 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆23Updated last week
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆122Updated last year
- Web interface for Huebner inverter☆36Updated last year
- LIN master node emulation with preemptive background operation☆33Updated last year
- The okayest ESP32-S2 CAN development board☆19Updated 3 years ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆14Updated 5 years ago
- Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3☆35Updated last year
- ☆10Updated 2 years ago
- Provide LIN-Master functions (write and request LIN-Frames via hardware UART☆43Updated last year
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 5 years ago