Alternatives and similar repositories for stm32-sine:

Users that are interested in stm32-sine are comparing it to the libraries listed below

• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆65Updated 2 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆37Updated 5 years ago
• normaldotcom / canable-fw
  Firmware for the CANable USB to CAN adapter
  ☆201Updated last year
• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆67Updated 3 years ago
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆57Updated this week
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆72Updated 8 years ago
• damienmaguire / Stm32-vcu
  A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.
  ☆140Updated 2 weeks ago
• foxBMS / foxbms-1
  foxBMS 1, online documentation at https://iisb-foxbms.iisb.fraunhofer.de/foxbms/gen1/docs/html/latest/
  ☆172Updated last year
• LibreSolar / bms-c1
  16s / 100A Battery Management System
  ☆144Updated 6 months ago
• LibreSolar / bms-firmware
  Firmware for LibreSolar BMS boards based on bq769x0, bq769x2 or ISL94202
  ☆171Updated last week
• EnnoidMe / ENNOID-BMS
  Open-Source: Modular BMS based on LTC68XX & STM32 MCU for up to 400V EV battery pack
  ☆244Updated 3 years ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆68Updated 3 years ago
• damienmaguire / Tesla-Charger
  Reverse Engineering of the Tesla 10Kw charger and development of an open source control board
  ☆118Updated 4 years ago
• rombrew / phobia
  Phobia Motor Controller
  ☆61Updated last week
• moonglow / pcan_pro_x
  XCAN PRO/PRO FD/FD USB2CAN firmware implementation for cheap STM32F4 hardware
  ☆260Updated 3 years ago
• davefiddes / c2000-inverter
  Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.
  ☆15Updated 2 years ago
• galpavlin / BESC-G2
  BESC second generation
  ☆50Updated 3 years ago
• DieBieEngineering / DieBieMS-Firmware
  Firmware for the DieBieMS
  ☆54Updated 4 years ago
• makerbase-mks / CANable-MKS
  ☆202Updated last year
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆75Updated 2 years ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆79Updated last year
• TheRo0T / CAN-USB-STM32
  ☆64Updated 9 years ago
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆73Updated last year
• vedderb / bldc-bootloader
  A bootloader for my custom motor controller. Read more at http://vedder.se/2015/01/vesc-open-source-esc/
  ☆70Updated 3 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆63Updated last month
• Zubax / canface_cf1
  High performance CAN-USB/CAN-UART adapter + UAVCAN devboard
  ☆36Updated 2 years ago
• nopnop2002 / Arduino-STM32-CAN
  Can Example for Arduino Core STM32
  ☆235Updated 4 months ago
• eziya / STM32_SPI_MCP2515
  STM32 + MCP2515 CAN Example
  ☆115Updated 2 years ago
• effenco / stm32-can-bootloader
  can bootloader for use with stm32 microcontrollers
  ☆41Updated 3 years ago
• SummerFalls / pcan_cantact
  PCAN firmware for CANtact ( CANable ) or any other similar boards.
  ☆22Updated last year