jamiejones85 / ESP32-Chademo
ESP32 Based Chademo implementation
☆14Updated 5 months ago
Alternatives and similar repositories for ESP32-Chademo:
Users that are interested in ESP32-Chademo are comparing it to the libraries listed below
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 11 months ago
- Software for Damien Maguire's CHAdeMO controller☆20Updated 4 years ago
- Collection of CAN logs from different electric vehicles☆29Updated 6 months ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆60Updated 4 years ago
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- leaf spline revers engineering☆12Updated 4 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆77Updated 2 months ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆11Updated 4 years ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆40Updated 3 years ago
- ☆10Updated last year
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆24Updated last year
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆56Updated 2 months ago
- ESP32 talks via SPI with QCA7005 PLC modem☆20Updated last year
- STM32 with QCA7005 as CCS charge controller☆70Updated this week
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆20Updated 3 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆17Updated last week
- CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4☆23Updated 2 years ago
- 7th generation GEVCU source code☆22Updated this week
- ☆15Updated 2 weeks ago
- Empty Openinverter project to start your own☆15Updated last year
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆17Updated 2 years ago
- Open Inverter - Alternative Web Interface☆31Updated 3 years ago
- QCA7000 PLC Board☆13Updated 2 years ago
- Web interface for Huebner inverter☆34Updated 4 months ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- Redacted code for Rust-based Charge Port Controller☆11Updated 4 years ago
- Source code and documentation for the CAN Logger 3, a project sponsored by the National Science Foundation (NSF) and National Motor Freig…☆16Updated 7 months ago