damienmaguire / BMW_SBoxLinks
Reverse Engineering of the BMW SBox for use in ev conversion projects
☆14Updated 2 years ago
Alternatives and similar repositories for BMW_SBox
Users that are interested in BMW_SBox are comparing it to the libraries listed below
Sorting:
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 5 months ago
- Collection of CAN logs from different electric vehicles☆39Updated this week
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- Reverse engineering of the BMW PHEV battery pack bms CAN bus data☆10Updated last year
- ☆20Updated 9 months ago
- leaf spline revers engineering☆14Updated 5 years ago
- ☆44Updated 3 years ago
- SIMPBMS code for I3 Modules☆47Updated 2 years ago
- BMW CANbus gateway emulator & proxy☆22Updated 5 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆48Updated 2 years ago
- C# app that shows a simple way to calculate the CRC byte used by some canbus frames in Nissan Leafs☆12Updated 11 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆23Updated this week
- Tips and tricks on repairing the fragile ZE0 LEAF PTC heater☆11Updated 3 years ago
- ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware☆39Updated 3 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆93Updated 7 months ago
- Wideband Lambda Controller with Bosch CJ125☆43Updated 2 years ago
- Logging CAN, KLINE and ISO15765, TP2.0 directly into Wireshark and parsing UDS and KWP2000 data☆30Updated 2 years ago
- Source code and documentation for the CAN Logger 3, a project sponsored by the National Science Foundation (NSF) and National Motor Freig…☆22Updated last year
- ESP32 Based Chademo implementation☆19Updated last year
- VAGCANLOGGER - KW1281 & VW TP 2.0☆33Updated 12 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆16Updated 2 years ago
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- VW TP 2.0 Datalogger for the ESP32☆22Updated 3 years ago
- Information on the BMW E65 7 Series Powertrain CAN bus☆32Updated 7 years ago
- Volvo LIN bus reader☆100Updated 5 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆64Updated 9 months ago
- DS2 K-line library for Arduino and ESP32☆51Updated 9 months ago
- Can based decoding of VW bms data☆39Updated last year