damienmaguire / Chademo-Fast-Charge-ControllerLinks
Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles
☆45Updated 4 years ago
Alternatives and similar repositories for Chademo-Fast-Charge-Controller
Users that are interested in Chademo-Fast-Charge-Controller are comparing it to the libraries listed below
Sorting:
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- Collection of CAN logs from different electric vehicles☆39Updated this week
- ESP32 Based Chademo implementation☆19Updated last year
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- ESP32 talks via SPI with QCA7005 PLC modem☆26Updated 2 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 5 months ago
- STM32 with QCA7005 as CCS charge controller☆96Updated last week
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆93Updated 7 months ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆14Updated 2 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- Electric vehicle CCS charging investigations with Python☆213Updated this week
- reverse engineering of Hyundai Ioniq (classic, production 2018)☆21Updated last month
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆65Updated last year
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆64Updated 9 months ago
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆204Updated this week
- SIMPBMS code for I3 Modules☆47Updated 2 years ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆31Updated 2 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆23Updated this week
- SimpBMS Documentation☆91Updated 3 years ago
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆22Updated 3 years ago
- Reverse engineering of the BMW PHEV battery pack bms CAN bus data☆10Updated last year
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- ☆177Updated 7 years ago
- Simple ESP32 firmware for Type2 BEV charging☆19Updated 3 years ago
- BelayBox reference hardware☆60Updated last year
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆14Updated 5 years ago
- ☆26Updated 10 years ago
- 7th generation GEVCU source code☆26Updated 2 months ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆129Updated 4 years ago