Alternatives and similar repositories for Tesla-Charger

Users that are interested in Tesla-Charger are comparing it to the libraries listed below

• collin80 / GEVCU
  Generalized Electric Vehicle Control Unit
  ☆117Updated 3 years ago
• damienmaguire / Tesla-Model-3-Charge-Port-Controller
  Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU
  ☆22Updated 4 years ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆79Updated 3 years ago
• jsphuebner / stm32-sine
  Main firmware of the Huebner inverter project
  ☆181Updated last month
• damienmaguire / Tesla-Front-Drive-Unit
  Open Source Logic board to control the Tesla Model S Front Drive Unit
  ☆53Updated 2 months ago
• jsphuebner / stm32-car
  Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus
  ☆64Updated last week
• damienmaguire / Tesla-Drive-Unit
  Open Source logic board for the Tesla Model S large rear drive unit. PCB Files in DesignSpark 8 format.
  ☆100Updated 5 years ago
• damienmaguire / Stm32-vcu
  A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.
  ☆207Updated last week
• damienmaguire / Lexus-GS450H-Inverter-Controller
  Opensource controller for the Lexus GS450H Hybrid inverter and gearbox
  ☆21Updated 4 years ago
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆62Updated 4 years ago
• damienmaguire / Tesla-Model-3-Battery-BMS
  Reverse engineering of the Tesla Model 3 battery bms control
  ☆69Updated 3 months ago
• collin80 / TeslaBMS
  ☆177Updated 7 years ago
• dimecho / Open-Inverter-WebInterface
  Open Inverter - Alternative Web Interface
  ☆34Updated 4 years ago
• damienmaguire / Tesla-Model-3-Drive-Unit
  Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
  ☆81Updated last month
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆74Updated 6 years ago
• damienmaguire / VW-OnBoard-Charger
  Hacking and reverse engineering of the VW Onboard AC chargers
  ☆17Updated 2 years ago
• rusefi / hw_microRusEfi
  microRusEfi board for rusEfi ECU
  ☆85Updated 4 months ago
• Isaac96 / CHAdeMOSoftware
  Software for Damien Maguire's CHAdeMO controller
  ☆23Updated 5 years ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆107Updated 7 years ago
• jsphuebner / esp8266-web-interface
  Web interface for Huebner inverter
  ☆36Updated last year
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆94Updated 7 months ago
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆120Updated 7 years ago
• celeron55 / prius3charger_buck
  Prius Gen 3 buck/boost converter charger controller - buck mode charging
  ☆15Updated 5 years ago
• collin80 / GEVCU6
  Generalized Vehicle Control Unit for version 6 boards
  ☆25Updated last year
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 10 months ago
• damienmaguire / Tesla-Model-3-Charger
  Reverse Engineering of the Tesla Model 3 charger and development of an open source control board
  ☆36Updated last year
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆105Updated last week
• casainho / Lebowski-controller-IC
  ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation
  ☆19Updated 5 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆122Updated last year
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆20Updated 6 months ago