uhi22 / Ioniq28InvestigationsLinks
reverse engineering of Hyundai Ioniq (classic, production 2018)
☆20Updated last week
Alternatives and similar repositories for Ioniq28Investigations
Users that are interested in Ioniq28Investigations are comparing it to the libraries listed below
Sorting:
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆28Updated 2 years ago
- QCA7000 PLC Board☆14Updated 3 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 6 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 2 months ago
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆45Updated 4 years ago
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆84Updated 4 months ago
- Collection of CAN logs from different electric vehicles☆37Updated last year
- CAN bus analyzing and simulation GUI tool for Windows.☆74Updated 7 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- This is an Open Source Hardware USB to CAN-FD Interface☆73Updated 7 months ago
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆21Updated 3 years ago
- ESP32 Based Chademo implementation☆17Updated last year
- Command-line tool to flashing devices by CAN-BUS☆86Updated 5 years ago
- ☆10Updated 2 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆12Updated 2 years ago
- STM32 with QCA7005 as CCS charge controller☆86Updated last month
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆61Updated 4 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆122Updated 4 years ago
- ESP32 talks via SPI with QCA7005 PLC modem☆23Updated 2 years ago
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆88Updated 2 months ago
- Can Example for Arduino Core STM32☆11Updated 5 years ago
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆182Updated 2 weeks ago
- 7th generation GEVCU source code☆26Updated 2 weeks ago
- Firmware to support gs_usb on most STM32 devices☆49Updated last month
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆84Updated 3 years ago
- Empty Openinverter project to start your own☆15Updated last year
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆16Updated 2 years ago