jsphuebner / stm32-islandLinks
Use openinverter hardware as an island (non-grid connected) inverter
☆16Updated 4 years ago
Alternatives and similar repositories for stm32-island
Users that are interested in stm32-island are comparing it to the libraries listed below
Sorting:
- ☆10Updated 2 years ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆14Updated 5 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆64Updated 9 months ago
- ☆20Updated 9 months ago
- CAN Bus logger with SD card implemented using ChibiOS☆73Updated 6 years ago
- Repurposes the openinverter main board as a buck or boost mode charger☆16Updated 2 years ago
- Empty Openinverter project to start your own☆15Updated last week
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- Open Inverter - Alternative Web Interface☆34Updated 4 years ago
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆22Updated 4 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆16Updated 2 years ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆78Updated 3 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆129Updated 4 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆14Updated 2 years ago
- ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation☆19Updated 5 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- Open source logic board to control the Toyota Prius Gen 3 Inverter☆51Updated 4 months ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆107Updated 7 years ago
- Reverse engineering of the BMW PHEV battery pack bms CAN bus data☆10Updated last year
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆12Updated 8 years ago
- Web interface for Huebner inverter☆36Updated last year
- Tesla ChargePort SWCAN Decoder☆13Updated 5 years ago
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆204Updated this week
- Redacted code for Rust-based Charge Port Controller☆11Updated 5 years ago
- Open Source Logic board to control the Tesla Model S Front Drive Unit☆53Updated 2 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 5 months ago
- LIN, FD-CAN hacker: Gateway+filter+tools. Based on STM32F105 STM32F205 STM32F407 STM32H730☆28Updated 2 months ago
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆122Updated last year
- Generic modules that can be used in many projects☆29Updated 3 months ago