hughsie / mobis-vess
Reverse engineering the KIA & Hyundai Mobis VESS CAN device
☆13Updated 3 years ago
Alternatives and similar repositories for mobis-vess:
Users that are interested in mobis-vess are comparing it to the libraries listed below
- Barra in a 7 Series BMW☆13Updated last month
- Simple Arduino project to detect RF jammers for a couple of bucks☆16Updated 5 years ago
- Yet another CAN Hacker implementation☆14Updated last year
- SLSS CANAnalyser is Windows CAN-Bus-Analysis-Software to show, record and evaluate CAN-Bus signals / data. For the connection with the CA…☆14Updated 2 years ago
- Replies to all OBD2 requests with dummy data☆11Updated last year
- Hydrabus Shield for LIN and CAN Buses☆34Updated 2 years ago
- Fulcrum is the ultimate J2534 DLL Shim written in C++ which is able to pipe data out from the native calls to any other location for supe…☆31Updated 2 months ago
- ☆23Updated 5 years ago
- Subaru Select Monitor to Canbus adapter☆27Updated 6 years ago
- Reverse engineering GM's powertrain control module software from my Corvette☆11Updated 4 years ago
- Utility to read Ram of a MED9.1 ECU☆15Updated last year
- ☆18Updated 3 years ago
- Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)☆36Updated 6 years ago
- Firmware signature bypass on the IC204☆26Updated 3 years ago
- Plug-in datalogger that saves live engine data to SD card.☆23Updated 7 years ago
- A tool to determine the source of CAN IDs, and filter CAN packets.☆12Updated 5 years ago
- Ghidrascripts which will help disassembly of MED9.1 ECUs☆19Updated 2 weeks ago
- Hacking a Vehicles CanBus☆23Updated 3 years ago
- GNURadio Flow Chart for capturing Ford 900Mhz keyfobs.☆24Updated 5 years ago
- Miscellanous code for interacting with car electronics☆48Updated 2 months ago
- Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features☆29Updated 2 years ago
- Tools for disassembling and analyzing ECUs☆18Updated 12 years ago
- Read and write your Volvo ECU (Bosch ME7) using a DiCE cable. Early working version assembled from various abandoned projects. Its old an…☆14Updated last year
- This is simple half duplex radio communication device built with CC1101 module and Arduino Pro Micro (3.3V / 8MHz) using SmartRC library☆18Updated 2 years ago
- ☆17Updated 7 years ago
- Control your car inputs (e.g. switches) and outputs (e.g. lights) with software over CAN☆26Updated 4 years ago
- Open Source CanBUS J2534 Honda/Acura Reflash Tool (Work in Progress)☆50Updated 2 years ago
- Saleae Controller Area Network (CAN) Analyzer☆23Updated last year
- diverses flow charts for usrp and hackrf☆10Updated 5 years ago
- Unlocking the Cruze, one byte at a time.☆13Updated 2 years ago