Millisman / QCA7000Links
QCA7000 PLC Board
☆14Updated 3 years ago
Alternatives and similar repositories for QCA7000
Users that are interested in QCA7000 are comparing it to the libraries listed below
Sorting:
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆29Updated 2 years ago
- reverse engineering of Hyundai Ioniq (classic, production 2018)☆20Updated 3 weeks ago
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆87Updated 4 months ago
- ESP32 talks via SPI with QCA7005 PLC modem☆25Updated 2 years ago
- A small PBC to simulate the CP and PP signals of an electric vehicle (EV)☆13Updated 4 years ago
- Simple ESP32 firmware for Type2 BEV charging☆14Updated 2 years ago
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆21Updated 3 years ago
- STM32 with QCA7005 as CCS charge controller☆87Updated last month
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆45Updated 4 years ago
- a ESP32-S3 talks to a QCA7005 to read the SOC of a car☆26Updated 2 years ago
- ☆10Updated 2 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Generic modules that can be used in many projects☆29Updated 2 weeks ago
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago
- ESP32 Based Chademo implementation☆18Updated last year
- This project is aimed to get the SoC by using current integration method which measure the current passing through current sensor while c…☆10Updated 5 years ago
- BelayBox reference hardware☆57Updated last year
- STM32 firmware for the Yeti power board reference hardware☆20Updated last year
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆64Updated 11 months ago
- Empty Openinverter project to start your own☆15Updated last year
- Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3☆47Updated 2 years ago
- This is an Open Source Hardware USB to CAN-FD Interface☆73Updated 8 months ago
- Simple ISO15118-3 SLAC implementation☆18Updated 7 months ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆61Updated 6 months ago
- Firmware for ENNOID-BMS☆29Updated 2 years ago
- Repurposes the openinverter main board as a buck or boost mode charger☆15Updated 2 years ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 3 months ago
- Open source project that uses the CANable hardware from protofusion.org☆41Updated 2 months ago
- CANbus to http bridge using esp32☆45Updated 3 months ago
- ☆52Updated 5 years ago