Alternatives and similar repositories for pyPLC:

Users that are interested in pyPLC are comparing it to the libraries listed below

• uhi22 / ccs32clara
  STM32 with QCA7005 as CCS charge controller
  ☆71Updated last month
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆78Updated 4 months ago
• Sevenstax / FreeV2G
  Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…
  ☆59Updated 5 months ago
• EcoG-io / josev
  The community version of Josev - An Operating System for the V2G charging Stations
  ☆136Updated last year
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆91Updated 5 months ago
• EcoG-io / iso15118
  Implementation of the ISO 15118 Communication Protocol (-2, -20, -8)
  ☆203Updated last month
• devolo / dlan-greenphy-sdk
  The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.
  ☆2Updated 6 months ago
• uhi22 / ccs32berta
  ESP32 talks via SPI with QCA7005 PLC modem
  ☆20Updated last year
• SmartEVSE / SmartEVSE-3
  Smart Electric Vehicle Charging Station (EVSE)
  ☆158Updated last week
• EcoG-io / pyslac
  Implementation of the Signal Level Attenuation Characterisation (SLAC) introduced in ISO15118-3
  ☆44Updated last year
• SwitchEV / RISE-V2G
  The only fully-featured reference implementation of the Vehicle-2-Grid communication interface ISO 15118
  ☆225Updated last year
• uhi22 / ccs32
  WT32-ETH01 with tpLink HomePlug modem as CCS charge controller
  ☆24Updated last year
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆30Updated 7 months ago
• damienmaguire / Chademo-Fast-Charge-Controller
  Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles
  ☆43Updated 3 years ago
• PionixPublic / reference-hardware
  BelayBox reference hardware
  ☆53Updated 8 months ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• ChargePoint / wireshark-v2g
  Dissector for the V2G Protocols
  ☆53Updated 6 months ago
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆86Updated 2 years ago
• EDF-Lab / eVDriveFlow
  EDF R&D implementation of ISO 15118-20.
  ☆55Updated 2 years ago
• SmartEVSE / ESP32-PLC
  a ESP32-S3 talks to a QCA7005 to read the SOC of a car
  ☆21Updated last year
• cblach / nikola-v2gstack
  ☆22Updated 9 years ago
• FlUxIuS / V2Gdecoder
  V2Gdecoder: encode and decode V2G messages on the fly
  ☆36Updated 2 years ago
• Tom-evnut / BMWI3BMS
  SIMPBMS code for I3 Modules
  ☆44Updated last year
• Martin-P / OpenV2G
  An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communicati…
  ☆100Updated 2 years ago
• jamiejones85 / ESP32-Chademo
  ESP32 Based Chademo implementation
  ☆14Updated 7 months ago
• geynis / v2g-ws-dissectors
  V2G (Vehicle-to-Grid) Wireshark LUA dissectors (ISO 15118-2)
  ☆23Updated 3 years ago
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆178Updated last month
• damienmaguire / MG-EV-Charger
  Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
  ☆12Updated last year
• SmartEVSE / smartevse
  Smart EVSE Electric Vehicle Charging Station
  ☆98Updated 4 years ago
• davefiddes / openinverter-can-tool
  A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection
  ☆17Updated 2 months ago