damienmaguire / Tesla-Model-3-ChargerLinks
Reverse Engineering of the Tesla Model 3 charger and development of an open source control board
☆36Updated last year
Alternatives and similar repositories for Tesla-Model-3-Charger
Users that are interested in Tesla-Model-3-Charger are comparing it to the libraries listed below
Sorting:
- Reverse engineering of the Tesla Model 3 battery bms control☆67Updated 3 months ago
- Opensource hardware stand alone controller for the Tesla Model 3 Charge Port ECU☆22Updated 4 years ago
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆48Updated 2 years ago
- ☆177Updated 7 years ago
- DBC file for Tesla Model 3 used by the Onyx M2 projects☆29Updated last year
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated 2 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆129Updated 4 years ago
- ESP32 port of the existing TeslaBMS program☆10Updated 2 years ago
- LEAF CAN bus message decoding with proper database files☆209Updated 8 months ago
- Collection of CAN logs from different electric vehicles☆39Updated this week
- Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF☆76Updated 11 months ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆64Updated 9 months ago
- DBC file for Tesla Model 3 CAN messages☆359Updated 2 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆23Updated last week
- Fully Open CCS Charge Controller Interface with QCA7005 PLC modem☆93Updated 7 months ago
- CAN BUS Man In The Middle for spying on and modifyling automotive can traffic on the fly.☆37Updated 5 years ago
- Tesla ChargePort SWCAN Decoder☆13Updated 5 years ago
- Reverse Engineering of the Tesla Gen3 charger and development of an open source control board☆17Updated 4 years ago
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆107Updated 7 years ago
- ☆44Updated 2 years ago
- ☆26Updated 10 years ago
- Retrieve battery diagnostic data from your smart electric drive EV.☆59Updated 3 years ago
- Open Source Logic board to control the Tesla Model S Front Drive Unit☆53Updated 2 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 5 months ago
- Originally a development tool for Scan My Tesla, but contributions has turned into a standalone canbus data analyzer suite, supporting a …☆242Updated last year
- Can based decoding of VW bms data☆39Updated last year
- Redacted code for Rust-based Charge Port Controller☆11Updated 5 years ago
- An opensource solution for connecting OBD2 straight to the Nissan Leaf battery☆66Updated last year
- Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.☆81Updated last month