jsphuebner / tumanako-inverter-fw-bootloaderLinks
☆10Updated 2 years ago
Alternatives and similar repositories for tumanako-inverter-fw-bootloader
Users that are interested in tumanako-inverter-fw-bootloader are comparing it to the libraries listed below
Sorting:
- Empty Openinverter project to start your own☆15Updated 3 weeks ago
- Web interface for Huebner inverter☆36Updated last year
- Hardware design files for Lithium BMS☆14Updated 4 years ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆21Updated 4 years ago
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆64Updated 2 weeks ago
- Repurposes the openinverter main board as a buck or boost mode charger☆16Updated 2 years ago
- Generic modules that can be used in many projects☆29Updated last week
- Open Inverter - Alternative Web Interface☆34Updated 4 years ago
- Eagle schematics of inverter main board, sensor boards and gate drivers☆79Updated 3 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆74Updated 6 years ago
- Use openinverter hardware as an island (non-grid connected) inverter☆16Updated 5 years ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆62Updated 4 years ago
- CAN (Dual) bus Arduino library for stm32F042, stm32F103, stm32F105, stm32F107, stm32L4, stm32F4☆29Updated 2 years ago
- My version of the Heubner open source electric vehicle motor inverter. All files in Designspark 8 format.☆12Updated 8 years ago
- ESP32 slcan compatible device☆105Updated 2 weeks ago
- CAN Bus Bridge / Smart Repeater☆36Updated 10 months ago
- ☆51Updated 6 years ago
- ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation☆19Updated 5 years ago
- Prius Gen 3 buck/boost converter charger controller - buck mode charging☆15Updated 5 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆16Updated 2 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆14Updated 2 years ago
- ☆20Updated 10 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆20Updated 6 months ago
- Open Source CAN bus Analyser and Simulation Software☆67Updated 8 months ago
- Provide LIN-Master functions (write and request LIN-Frames via hardware UART☆45Updated last year
- Yet another USB-CAN adapter.☆15Updated 4 years ago
- Can Example for Arduino Core STM32☆11Updated 5 years ago
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.☆81Updated last month
- Software for Damien Maguire's CHAdeMO controller☆23Updated 5 years ago