uhi22 / foccci
Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
☆74Updated last month
Alternatives and similar repositories for foccci:
Users that are interested in foccci are comparing it to the libraries listed below
- STM32 with QCA7005 as CCS charge controller☆68Updated last month
- ESP32 Based Chademo implementation☆15Updated 4 months ago
- Collection of CAN logs from different electric vehicles☆29Updated 4 months ago
- Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles☆12Updated 10 months ago
- ESP32 talks via SPI with QCA7005 PLC modem☆20Updated last year
- WT32-ETH01 with tpLink HomePlug modem as CCS charge controller☆24Updated last year
- Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging☆46Updated last year
- Hacking and reverse engineering of the VW Onboard AC chargers☆15Updated last year
- Development of a control unit to permit Chademo 50kw DC Fast Charging on converted electric vehicles☆39Updated 3 years ago
- A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection☆15Updated last week
- Software for Damien Maguire's CHAdeMO controller☆19Updated 4 years ago
- Electric vehicle CCS charging investigations with Python☆163Updated this week
- The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.☆2Updated 3 months ago
- Python based Host MPU Application for the use with 8DEVICES WHITE-BEET Embedded ISO15118 Module modules to realize IEC/ISO15118 and DIN70…☆58Updated 2 months ago
- OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter☆58Updated 3 years ago
- QCA7000 PLC Board☆11Updated 2 years ago
- ☆14Updated 5 months ago
- SimpBMS Documentation☆86Updated 2 years ago
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆129Updated this week
- Very hacky project that talks to the Nissan Leaf BMS (aka LBC) and to the VW CAN bus☆55Updated last month
- BelayBox reference hardware☆48Updated 5 months ago
- Opensource controller for the Lexus GS450H Hybrid inverter and gearbox☆19Updated 3 years ago
- Reverse Engineering of the Tesla 10Kw charger and development of an open source control board☆114Updated 3 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated last year
- Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)☆17Updated 2 years ago
- Reverse Engineering of the BMW SBox for use in ev conversion projects☆11Updated last year
- Provide LIN-Master functions (write and request LIN-Frames via hardware UART☆35Updated 3 months ago
- A collection of DBC files☆21Updated 11 months ago
- Hella IBS 200 X Lead-Battery Sensor via LIN-Bus☆24Updated 5 months ago
- Dissector for the V2G Protocols☆51Updated 4 months ago