br5555 / stanleyLinks
☆11Updated 7 years ago
Alternatives and similar repositories for stanley
Users that are interested in stanley are comparing it to the libraries listed below
Sorting:
- ROS obstacle detection for 3D point clouds using a height map algorithm.☆80Updated 5 years ago
- ☆60Updated 9 years ago
- ROS Catkin package to track people using octree and cluster extraction☆78Updated 7 years ago
- Lidar Odometry and Mapping (J.Zhang et.al). EECS/NAVARCH 568 (Mobile Robotics) Final Project☆112Updated 5 years ago
- Using NDT to build a Graph SLAM☆63Updated 7 years ago
- Tracking objects obtaining from segmentor and improve segmentation. https://github.com/LidarPerception/segmenters_lib☆70Updated 4 years ago
- Udacity Self-Driving Car Engineer Nanodegree - Term 2 - Lesson 6 - Lidar and Radar Fusion with EKF in C++.☆29Updated 5 years ago
- 3d lidar slam package.☆131Updated 6 years ago
- Particle filter-based localization in an occupancy grid map.☆109Updated 6 years ago
- Source dump from http://sourceforge.net/projects/stanforddriving/☆12Updated 10 years ago
- C++ Implementation of the NDT mapping and localization algorithm for ADV on ROS.☆111Updated 5 years ago
- GroundSegmentation using LiDAR16 PointCloud☆12Updated 5 years ago
- Pose calculation using wheel encoder data,☆33Updated 8 years ago
- Detect movements in Pointclouds to calibrate Laserscanner with Interial Measurement Units and GPS☆49Updated 7 years ago
- An open autonomous driving platform☆19Updated 6 years ago
- Goal of project was to detect vehicles and pedestrians using Lidar points in real time. This uses ROS nodes.☆30Updated 4 years ago
- Open source library for Velodyne 3D LIDAR point clouds processing provided by Robo@FIT group.☆84Updated 8 years ago
- IMU-Lidar Extrinsic Calibration Package☆147Updated 5 years ago
- ROS publisher for Kitti dataset☆70Updated 6 years ago
- This is a lidar ground filter ros node☆29Updated 6 years ago
- ROS package for Sensor fusion between lidar (PointClouds, PCL) and Image sensors.☆41Updated 10 years ago
- This is an online calibration system between multiple sensors (camera, lidar, IMU). It is being created. . . . . .☆64Updated 5 years ago
- cartographer configuration files for KITTI dataset including .lua and .launch☆41Updated 5 years ago
- ☆136Updated 8 years ago
- This a ros package for multi-LiDAR calibration using three planar surfaces.☆130Updated 3 years ago
- ☆70Updated 6 years ago
- This is a ros package that implement the SqueezeSeg☆84Updated 6 years ago
- These is ndt library for ndt_mapping and ndt_localization☆54Updated 6 years ago
- The whole project for all our LiDAR perception☆20Updated 2 years ago
- SLAM package using NDT registration library of Autoware with loop-closure detection (odometry based) referenced from lego_loam.☆158Updated 6 years ago