Alternatives and similar repositories for xvcd

Users that are interested in xvcd are comparing it to the libraries listed below

• mnentwig / busbridge3
  Xilinx 7-series FTDI-FPGA interface through JTAG with 125 us roundtrip latency
  ☆20Updated 6 years ago
• HarmonInstruments / verilog
  ☆20Updated 3 years ago
• julbouln / dvi_lvds
  DVI to LVDS Verilog converter
  ☆25Updated 9 years ago
• jsloan256 / titan
  Altium PCB project for the Titan PCI Express development card. This card uses the Lattice ECP5 FPGA.
  ☆20Updated 10 years ago
• westonb / artix7-PCIe
  artix-7 PCIe dev board
  ☆31Updated 8 years ago
• blackmesalabs / MesaBusProtocol
  Flexible Byte transport protocol for bus bridging CPUs to FPGAs over UART,SPI,SERDES physical interfaces
  ☆35Updated last year
• AnttiLukats / HackaZynq
  Open Source ZYNQ Board
  ☆31Updated 10 years ago
• Efinix-Inc / xyloni
  This repo is for Efinix Xyloni development board users. It has projects and software to get you started working with the board.
  ☆45Updated 3 years ago
• hydrausb3 / wch-ch569-serdes
  WCH CH569 SerDes Reverse Engineering
  ☆30Updated 3 years ago
• barawn / xvcd-anita
  XVCD implementation for ANITA. Note that "ftdi_xvc_core.c" is a generic libftdi-based MPSSE XVC handler, and is awesome.
  ☆18Updated 5 years ago
• hamsternz / ArtyEtherentTX
  Sending raw data from the Digilent Arty FPGA board
  ☆25Updated 9 years ago
• gtortone / esp-xvcd
  ESP8266 Xilinx Virtual Cable - wifi JTAG
  ☆39Updated 4 years ago
• TMNTmaker / OV7670__ST7735-fpga
  ☆10Updated 9 years ago
• regymm / SqueakyBoard
  My self-designed ZYNQ-7010 4-layer developement board.
  ☆34Updated 4 years ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆63Updated 7 years ago
• jsyk / miilink
  Connecting FPGA and MCU using Ethernet RMII
  ☆23Updated 10 years ago
• IPDBG / IPDBG
  IPDBG
  ☆13Updated 5 months ago
• gregdavill / boson-sd-hardware
  Simple but Small Frame Grabber
  ☆38Updated 4 years ago
• Stanlazy / 7z010_ddr
  4-Layer XC7Z010 DDR3 Layout
  ☆18Updated 4 years ago
• emard / flearadio
  Digital FM Radio Receiver for FPGA
  ☆64Updated 10 years ago
• lambdaconcept / lambdaUSB
  A configurable USB 2.0 device core
  ☆32Updated 5 years ago
• Stanlazy / ZYNQ_Ruler
  Yet Another XC7Z010 Board
  ☆17Updated 3 years ago
• joshajohnson / ecp5-mini
  ECP5 FPGA in an "S7 Mini" form factor
  ☆89Updated 4 years ago
• hansfbaier / colorlight-qmtech-adapter
  Adapter to use Colorlight i5/i9 FPGA boards in a QMTech board form factor
  ☆20Updated 3 years ago
• ECP5-PCIe / ECP5-Utils
  Utilities for the ECP5 FPGA
  ☆17Updated 4 years ago
• imrickysu / ZYNQ-Custom-Board-Bring-Up-Guide
  This is a guide for bringing up custom ZYNQ boards. It covers test sequence, test method, common error situations and code and project th…
  ☆72Updated 8 years ago
• hansfbaier / ch569-usb3-board
  USB3 super speed development board useful as FPGA expansion based on WCH-Tech CH569
  ☆27Updated 3 years ago
• ZipCPU / arrowzip
  A ZipCPU based demonstration of the MAX1000 FPGA board
  ☆23Updated 4 years ago
• stevenbell / csirx
  Open-source CSI-2 receiver for Xilinx UltraScale parts
  ☆37Updated 6 years ago
• myriadrf / FreeSRP_GW
  The FPGA design for the FreeSRP's Artix 7 FPGA
  ☆26Updated 8 years ago