NKU-MobFly-Robotics / laser_scan_matcherLinks
An incremental laser scan matcher, using PLICP (point-to-line iterative closest point) scan matching algorithm.
☆138Updated 2 years ago
Alternatives and similar repositories for laser_scan_matcher
Users that are interested in laser_scan_matcher are comparing it to the libraries listed below
Sorting:
- Realtime Glass Detection with Laser Rangefinders for Robot Navigation and Mapping☆117Updated 4 years ago
- Development code for the perception_oru ROS stack☆59Updated 6 years ago
- Scan Matcher to improve robot's localization☆60Updated 11 years ago
- Robust Planar Odometry Based on Symmetric Range Flow and Multi-Scan Alignment☆109Updated 4 years ago
- Supplemental material for "Simultaneous calibration of odometry and sensor parameters for mobile robots"☆88Updated 8 years ago
- Integrates an IMU to predict future odometry readings☆180Updated 6 years ago
- 2d laser slam☆37Updated 7 years ago
- ros1 gazebo cartographer amcl☆63Updated 7 years ago
- ☆56Updated 7 years ago
- Localizaing a Robot with Wheel Encoder, IMU and AprilTag Detection☆42Updated 6 years ago
- global localization for robots in a 2d grid map☆20Updated 9 years ago
- A novel algorithm about laser line segment extraction using 2D laser data.☆136Updated last year
- A GUI tool for rosbag filtering☆79Updated 3 years ago
- map_server for Cartographer☆75Updated 6 years ago
- AMCL ROS package reimplementation for using GNSS data☆59Updated 11 months ago
- lidar localizer in Autoware AI☆187Updated 2 years ago
- Low drift 2D lidar slam with scan-to-scan match and scan-to-map match.☆123Updated 5 years ago
- Tools to work along side with LOAM 3D lidar slam and Octomaping☆59Updated 5 years ago
- A ROS C++ node that fuses IMU and Odometry☆74Updated 5 years ago
- This robot lcoalisation package for lidar-map based localisation using multi-sensor state estimation.☆87Updated 3 years ago
- This library contains fast and sparse implementations of multi-dimensional map representations using Normal Distributions Transforms.☆52Updated 5 years ago
- Bag files captured using a Clearpath Jackal Robot, which is equipped with a Velodyne VLP-16 and low-end IMU sensor. The published point c…☆76Updated 4 years ago
- SLAM package using NDT registration library of Autoware with loop-closure detection (odometry based) referenced from lego_loam.☆160Updated 6 years ago
- ☆55Updated last month
- use pre-defined reflector distribution to locate robot to world coordinate with 2D-Lidar☆24Updated 7 years ago
- ☆85Updated 5 years ago
- A ros package used to correct motion distortion of a 2D LIDAR. 2D激光雷达运动畸变校正☆97Updated 4 years ago
- loam SLAM with continuous scanning 2D laser, modified to work under ROS indigo and catkin☆80Updated 9 years ago
- Catkinized ROS Package of the OpenKarto Library (LGPL3)☆141Updated last year
- A library containing keypoint detectors for the stable detection of interest points in laser measurements and two descriptors for robust …☆33Updated last year