matthieuvigne / STS_servos
Arduino library for Feetech's STS smart servo
☆22Updated 8 months ago
Alternatives and similar repositories for STS_servos:
Users that are interested in STS_servos are comparing it to the libraries listed below
- ROS1 package for LDRobotic LD06 Lidar☆38Updated last year
- rosserial on ESP32 based on ESP-IDF☆40Updated last year
- Arlok is a 3D-printed Arduino Robot based on Arduino UNO☆19Updated 2 months ago
- A lightweight interface for AMRs☆12Updated 2 years ago
- ROS2-Node for ODrive☆23Updated 2 years ago
- Arduino driver for PMW3901 optical flow sensor☆57Updated 2 years ago
- Python library for the PWM3901 optical flow-rate sensor☆32Updated 8 months ago
- ROS2 package for LDRobotic LD06 Lidar☆32Updated last year
- Platform hardware for autonomous robot☆31Updated last month
- ☆15Updated this week
- Utility for Feetech SCS/STS servo☆16Updated last year
- ROS2 package for LDRobot lidar. Based on ROS2 Lifecycle nodes☆65Updated last month
- ROS Driver for the SCServo line by FEETECH☆9Updated 9 years ago
- Raspberry Pi Pico (RP2040) and Micro-ROS (ROS 2) Integration☆30Updated 3 years ago
- Teensy3.6 based flight control firmware☆25Updated 5 years ago
- raspberry pi c++ ROS mpu6050 IMU node☆23Updated 8 years ago
- ☆18Updated 4 months ago
- ☆14Updated 3 years ago
- ☆12Updated 3 years ago
- This project is my attempt to control a cheap sweeping robot with an added servo using an esp32-cam micro controller and ROS.☆17Updated 3 years ago
- ROS 2 package for VL53L5CX and VL53L7CX ToF (8x8 Array) Imagers☆12Updated this week
- ros2_control motors and imu hardware_interfaces for rosbot and rosbot XL☆11Updated last month
- ☆11Updated 2 weeks ago
- Embedded firmware and web user interface for self balancing telepresence robot☆31Updated 6 years ago
- Modular micro-ROS motor control on ESP32 PlatformIO. Roboost Module.☆24Updated 7 months ago
- Repo with packages for a low cost raspberry pi powered robot using ros2 foxy☆17Updated 3 years ago
- ROS 2 pakcages for Raspberry Pi Mouse V3☆30Updated 5 years ago
- A Teensy 4.0 Library (Arduino) to control the DJI C610 motor controllers. These controllers pair with the M2006 brushless gear motor to m…☆24Updated 3 years ago
- Simple ESP32-Arduino library to operate LX-16A serial servos☆23Updated last year
- Dual brushless motor ESC in #M5Stack module format☆28Updated 2 years ago