coxsys-robotics / coconut_mobile_robotLinks
High level software of Coconut agv base.
☆16Updated 4 years ago
Alternatives and similar repositories for coconut_mobile_robot
Users that are interested in coconut_mobile_robot are comparing it to the libraries listed below
Sorting:
- Testing Sensors individually using rosserial protocol.☆12Updated 4 years ago
- ROS message and service definitions for a ROS driver for ABB robots☆14Updated 7 months ago
- Simulation of a simple differential wheeled robot using ignition gazebo☆12Updated 2 years ago
- A work in progress of a 6DOF kinematics library for Arduino☆13Updated 7 years ago
- Second version design based on MG92B servomotors☆17Updated 5 years ago
- ROS driver for UM7 inertial measurement device.☆17Updated 2 years ago
- ☆14Updated 4 years ago
- ☆15Updated 6 years ago
- RoboCup Junior Soccer Robot sharing (CAD, Software, Electronics, materials and all stuff)☆15Updated 10 years ago
- Ubiquity Robotics Tutorials Wiki☆16Updated 2 years ago
- urdf for small humanoid robot☆10Updated 3 years ago
- ROS-Node for Neobotix mobile Robots with omni-directional kinematics☆16Updated 4 years ago
- ABB 1600 ROS PACKAGE(PICK AND PLACE)☆10Updated 8 years ago
- ROS based service robot☆45Updated 7 years ago
- Experiments with DDD, A Pico based Robot☆15Updated 2 years ago
- Arduino Sketch to process IMU messages from MPU6050 and publish with tiny ROS messages☆11Updated 8 years ago
- Robotic foot design involving force sensors☆21Updated 3 years ago
- MORPH : Modular Open Robotics Platform for Hackers☆45Updated 6 years ago
- Basic interface to two wheel differential mobile base and IMU using an Arduino(-like) mircocontroller to ROS.☆38Updated 10 years ago
- perceptions for manipulation☆16Updated last year
- control of a differential drive robot with a raspberry pi pico☆11Updated 4 years ago
- A lightweight interface for AMRs☆14Updated 3 years ago
- A wheeled robot with a Neato XV-21 LIDAR distance sensor.☆17Updated 7 years ago
- ros2_control motors and imu hardware_interfaces for rosbot and rosbot XL☆12Updated 5 months ago
- Program used in conjunction with Autodesk Inventor 2013 to convert assemblies into Universal Robot Description Format (URDF) for ROS.☆32Updated 8 years ago
- 使用robomaster官方C板基于CAN总线驱动电机（M3508、M2006、GM6020均可使用），程序使用CubeMX基于1.25.0版固件库生成。☆27Updated 4 years ago
- A spot arm clone based on dynamixels☆10Updated 5 years ago
- Firmware for STM32 microcontroller inside ROSbot for ROS 1 (rosserial based).☆11Updated 2 years ago
- Arduino Step Motor Driver Library☆21Updated 2 years ago
- In this code, motion planning of Omnidirectional Static Walking of Quadruped is explored. The algorithm implemented here minimizes the ti…☆11Updated 4 years ago