matpalm / ros-mpu6050-nodeLinks
raspberry pi c++ ROS mpu6050 IMU node
☆23Updated 9 years ago
Alternatives and similar repositories for ros-mpu6050-node
Users that are interested in ros-mpu6050-node are comparing it to the libraries listed below
Sorting:
- Basic interface to two wheel differential mobile base and IMU using an Arduino(-like) mircocontroller to ROS.☆38Updated 10 years ago
- ROS driver for the MPU6050 IMU and DMP.☆49Updated 9 years ago
- ROS driver for IMU Bosch BNO055☆59Updated 4 years ago
- Node to combine IMU data (accelerometers and gyroscopes) with Compass data (magnetometers) for a cleaner reading of a Vehicles Heading☆39Updated 9 years ago
- ☆64Updated 8 years ago
- ROS driver for VN-100 of VectorNav Technologies☆45Updated last year
- Arduino MPU9250 connection with rosserial communication☆15Updated 10 years ago
- perceptions for manipulation☆16Updated last year
- A simple ROS robot drive system.☆36Updated 6 years ago
- ☆102Updated 8 years ago
- A ROS driver and firmware to connect to Sparkfun OpenLog Artemis, 9DoF Razor IMU M0, 9DOF Razor IMU and 9DOF Sensor Stick. These boards c…☆93Updated 3 years ago
- myahrs_driver is a package that provides a ROS driver for the WITHROBOT myAHRS+.☆18Updated 4 years ago
- ☆73Updated 5 years ago
- ☆16Updated 7 years ago
- ROS based service robot☆45Updated 7 years ago
- hector_models contains (urdf) models of sensors and robot components.☆61Updated last year
- This repository provides mobile robot navigation system with i-Cart mini for Tsukuba Challenge under Project ORNE.☆74Updated last year
- ROS driver for the Raspberry Pi based differential drive robot☆27Updated 7 years ago
- State-machine based interface to navigation capabilities☆21Updated 9 months ago
- ☆22Updated 5 years ago
- A small package to use the RTIMULib in ROS☆31Updated 2 years ago
- icart packages provides robot models regarding i-Cart series, simulation environments and ypspur control bridge on ROS.☆25Updated last year
- Simple joystick teleop for twist robots☆92Updated 2 years ago
- Starting point for Magni Robots. Includes launch files and configuration.☆48Updated 2 weeks ago
- A ROS driver of Bosch BNO055 USB Stick☆23Updated 7 years ago
- rosserial on ESP32 based on ESP-IDF☆43Updated 2 years ago
- A ROS Package that subscribes to odometry values and publishes trajectories☆29Updated 3 years ago
- Set of ROS parameter files and scripts to launch Cartographer SLAM☆39Updated 5 years ago
- ☆41Updated 6 years ago
- ROS packages for TurtleBot3 deliver☆25Updated last year