0xD0M1M0 / ExoMy_Software
Source code for the 6-wheeled ExoMy rover - Forked
☆10Updated 10 months ago
Alternatives and similar repositories for ExoMy_Software:
Users that are interested in ExoMy_Software are comparing it to the libraries listed below
- ExoMy - The 3D Printed Rover - Successor repository☆24Updated 10 months ago
- A fork of linorobot2_hardware with support of esp32 on ROS2 Humble and other devices☆12Updated last year
- A python library for kinematic operations on a spot micro quadruped☆34Updated last year
- ROS1 package for LDRobotic LD06 Lidar☆38Updated last year
- HyperDog is a quadruped robot which is fully based on ROS 2 and Micro-ROS☆79Updated 4 months ago
- ☆37Updated 3 years ago
- ☆31Updated 2 months ago
- ☆23Updated this week
- ROS packages to control a version of Roger Chen's Sawppy Rover.☆59Updated 8 months ago
- Core software with ROS and MoveIt for the AR3 robotic arm☆115Updated 3 years ago
- A 3D Printed Quadrupedal Robot for Locomotion Research.☆98Updated 2 years ago
- Repo with packages for a low cost raspberry pi powered robot using ros2 foxy☆17Updated 3 years ago
- robot_localization , GPS , Mapviz and Nav2 gps ( ros2 humble)☆12Updated last month
- ☆48Updated 6 years ago
- A c++ library for kinematic operations on a spot micro quadruped☆15Updated 4 years ago
- This repositiory contains code that accompanies each chapter of the book Practical robotics in C++.☆39Updated 2 years ago
- Catch2 testing framework for ROS 2 unit and integration tests.☆14Updated 7 months ago
- Second version design based on MG92B servomotors☆17Updated 4 years ago
- ROS 1 & 2 repos based on Mini Pupper legged robots from MangDang☆109Updated last month
- Weed Detection and Laser Elimination on Farmbot Genesis.☆31Updated 7 months ago
- ROS2 node for interfacing with a GRBL device☆17Updated last year
- Tutorials for using OpenSHC☆21Updated 2 years ago
- WIP SimpleFoc running Dynamixel Protocol☆11Updated 2 years ago
- This is a ROS 2 & Micro-ROS project to control an RC tank with differential drive (skid steering) with an ESP32-CAM module.☆66Updated last year
- DIY ROS mobile robot☆36Updated 2 years ago
- ROS2 Installation file☆23Updated last year
- Exporter for Fusion 360 models to SDFormat☆44Updated 9 months ago
- SDFormat documentation and proposals.☆32Updated last month
- Docker images to facilitate Docker-based development.☆22Updated 2 months ago
- ☆23Updated 2 years ago