Alternatives and similar repositories for PCI2Nano-PCB

Users that are interested in PCI2Nano-PCB are comparing it to the libraries listed below

• defparam / PCI2Nano-RTL
  An open source FPGA PCI core & 8250-Compatible PCI UART core
  ☆41Updated 4 years ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆28Updated 11 months ago
• tomverbeure / intel_jtag_primitive_blog
  How to use the Intel JTAG primitive without using virtual JTAG
  ☆17Updated 3 years ago
• kazkojima / colorlight-i5-tips
  Tiny tips for Colorlight i5 FPGA board
  ☆57Updated 4 years ago
• mithro / kicad-pmod
  KiCad Library to make it easy to create both host boards and expansion boards and which are compatible with the Digilent "PMOD" specifica…
  ☆39Updated 4 years ago
• mattvenn / understanding-tinyfpga-bootloader
  understanding the tinyfpga bootloader
  ☆24Updated 7 years ago
• tomverbeure / ecp5_jtag
  Use ECP5 JTAG port to interact with user design
  ☆29Updated 3 years ago
• thotypous / alterajtaguart
  Altera JTAG UART wrapper for Bluespec
  ☆25Updated 11 years ago
• ZiyangYE / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆38Updated last year
• blackmesalabs / hyperram
  Portable Verilog RTL interface to S27KL0641DABHI020 64Mbit HyperRAM IC
  ☆88Updated 6 years ago
• lawrie / ulx3s_bit_streams
  Bit streams forthe Ulx3s ECP5 device
  ☆17Updated 2 years ago
• jevinskie / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆12Updated 2 years ago
• emard / ulx3s-misc
  Miscellaneous ULX3S examples (advanced)
  ☆78Updated this week
• blackmesalabs / s7_mini_fpga
  Example designs for the Spartan7 "S7 Mini" FPGA board
  ☆28Updated 6 years ago
• icebreaker-fpga / icebreaker-amaranth-examples
  This repository contains iCEBreaker examples for Amaranth HDL.
  ☆38Updated last year
• xobs / lxbuildenv
  Simplified environment for litex
  ☆14Updated 4 years ago
• sparrowgrine / prjtritium
  ☆22Updated 3 years ago
• no2fpga / no2muacm
  Drop In USB CDC ACM core for iCE40 FPGA
  ☆34Updated 3 years ago
• GuzTech / misato
  RISC-V Processor written in Amaranth HDL
  ☆38Updated 3 years ago
• j-marjanovic / jtag-quartus-ft232h
  ☆46Updated 3 years ago
• no2fpga / no2bootloader
  USB DFU bootloader gateware / firmware for FPGAs
  ☆65Updated 8 months ago
• mattvenn / logLUTs
  Tool to parse yosys and nextpnr logfiles to then plot LUT, flip-flop and maximum frequency stats as your project progresses.
  ☆21Updated last year
• quartiq / bscan_spi_bitstreams
  FPGA gateware and pre-build bitstreams that expose SPI over JTAG. The protocol is implemented (among others) by openocd.
  ☆54Updated 2 years ago
• azonenberg / antikernel-ipcores
  FPGA IP cores for the Antikernel OS, intended to be included as a submodule in SoC integrations
  ☆64Updated 3 weeks ago
• gtjennings1 / HyperBUS
  A basic HyperRAM controller for Lattice iCE40 Ultraplus FPGAs
  ☆60Updated 6 years ago
• gtjennings1 / UPDuino-LH154Q01-Display
  Design to connect Lattice Ultraplus FPGA to LH154Q01 Display
  ☆28Updated 6 years ago
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆22Updated 3 weeks ago
• ultraembedded / core_usb_host
  Basic USB 1.1 Host Controller for small FPGAs
  ☆90Updated 5 years ago
• esden / summon-fpga-tools
  A simple script to build open-source FPGA tools.
  ☆15Updated 5 years ago
• ironsteel / nes_ecp5
  NES FPGA implementation synthesized for the ulx3s ecp5 based fpga board
  ☆37Updated 2 years ago