Escain / HiwonderRPILinks
Raspberry PI library to control Hiwonder UART servos
☆15Updated 2 years ago
Alternatives and similar repositories for HiwonderRPI
Users that are interested in HiwonderRPI are comparing it to the libraries listed below
Sorting:
- Control Hiwonder/LewanSoul bus servos using Python 3☆12Updated 3 years ago
- hardware interface for PWM servos through Raspberry Pi's GPIO pins compatible with ros2_control framework☆11Updated 2 years ago
- A modern Python library for controlling HiWonder's LX-16A servos.☆49Updated last year
- ☆73Updated 4 years ago
- Differential Driving Robot with ESP32 and ODrive running micro-ROS☆13Updated 4 years ago
- Platform firmware for Kaia.ai compatible robots☆35Updated 2 months ago
- ☆13Updated 5 months ago
- ☆28Updated 2 years ago
- HyperDog is a quadruped robot which is fully based on ROS 2 and Micro-ROS☆108Updated 9 months ago
- ☆129Updated 4 months ago
- ROS2 package for LDRobotic LD06 Lidar☆35Updated 2 years ago
- MORPH : Modular Open Robotics Platform for Hackers☆45Updated 6 years ago
- ☆9Updated 2 years ago
- ROS2 Jazzy diffferential drive robot with teleoperation, SLAM and NAV2☆17Updated 7 months ago
- Raspberry Pi Pico (RP2040) and Micro-ROS (ROS 2) Integration☆30Updated 4 years ago
- ROS packages for AR3☆22Updated 5 months ago
- New quadruped robot, working on UP Xtreme board, and BLDC motors from Mjbots☆26Updated 2 years ago
- A ROS2 Compatible node that interfaces with the BNO085 IMU sensor via python☆11Updated 2 years ago
- RobotCAD is a FreeCAD workbench to generate robot description packages for ROS2 (URDF) with launchers to Gazebo and RViz. Includes contro…☆210Updated this week
- Library (based on libkondo4) to control the Kondo KHR-3HV robot.☆26Updated 6 years ago
- ☆34Updated 5 months ago
- ROS1 package for LDRobotic LD06 Lidar☆39Updated last year
- ☆39Updated 4 years ago
- NE Five ROS Metapackage☆23Updated 7 months ago
- ☆34Updated 5 years ago
- Contains the design, documentation, and implementation details for an additional gearbox compatible with the CyberGear motor. It enhances…☆17Updated 11 months ago
- Gripper, PCBs and ROS2 software for Six-Axis Robot Arm WE-R2.4 from LoboCNC☆25Updated 11 months ago
- ☆74Updated last month
- Software to drive a 3D printed robot with a SlushEngine or other motor controller driver☆28Updated 8 years ago
- 2017 NimbRo-OP2 hardware release☆52Updated 6 years ago