manfredipist / QI2CProtocolLinks
Qt implementation of I2C protocol for RaspberryPi along with some i2c sensors, in particular: TOF10120, VL53l1X, VL6180X, MPU6050, QMC5883L, TCA9548A, PCA9685
☆10Updated 4 years ago
Alternatives and similar repositories for QI2CProtocol
Users that are interested in QI2CProtocol are comparing it to the libraries listed below
Sorting:
- acc_model_enu.m is the main MATLAB-script and it can be useful for developers who works on inertial navigation (or something else using m…☆11Updated 3 years ago
- A self balancing robot made with ESP32☆12Updated 11 months ago
- A ROS node for communicating with the ICM20948 9DOF IMU.☆12Updated 4 years ago
- A python library for the YDLidar X2☆11Updated 3 years ago
- 动手学ROS2硬件控制篇MicroROS学习板例程☆12Updated 2 years ago
- Arduino library to support the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV☆18Updated 3 months ago
- A ROS2 Compatible node that interfaces with the BNO085 IMU sensor via python☆13Updated last month
- Control Hiwonder/LewanSoul bus servos using Python 3☆12Updated 4 years ago
- a low cost 3d lidar based on ydlidar-x4☆11Updated 4 years ago
- ☆11Updated 4 years ago
- ☆14Updated 5 months ago
- The differential drive has an ESP32 board for wireless connectivity a Client-Server network is established between the server laptop and …☆19Updated 3 years ago
- Source Code for Specify 6, Biological Collections Management Platform☆16Updated 11 months ago
- Stop the maintenance☆11Updated 3 years ago
- Linux driver for I2C communication with ICM20948.☆22Updated 5 months ago
- A simple micropython i2c library for TF-Luna LiDAR Module.☆13Updated 4 years ago
- LDROBOT LiDAR SDK(NEW)☆14Updated last year
- Differential Driving Robot with ESP32 and ODrive running micro-ROS☆13Updated 4 years ago
- autonomous ROS2 lawn mower☆10Updated 3 years ago
- [deprecated] ARM mbed based low-level firmware for ROSbot 2.0 for STM32F4 microcontroller☆10Updated 4 years ago
- Simulate MAVLink commands for use with groundstation apps on an ESP32☆15Updated 5 years ago
- A ROS enabled autonomous ground vehicle for service!☆13Updated 4 years ago
- MLX90640/41 python driver☆12Updated 4 years ago
- Stepper motor balancing robot project using NodeMCU32S and ESP32CAM coding with C++.☆10Updated 2 years ago
- ICM-20948 library which is based on the ICM-20648 library from Silicon Labs.☆13Updated 2 years ago
- Arduino library for the MPU-9250 enabling its digital motion process (DMP) features.☆12Updated 6 years ago
- This code can use Lidar's LD06 (LDS06) provided by LDROBOT from arduino.☆20Updated 3 years ago
- ☆13Updated 8 months ago
- 用STM32读取BNO085,并将状态数据通过CAN发送出去☆14Updated 5 years ago
- 📡 C Driver for the ICM-20948 9-Axis Telemetry sensor☆27Updated 3 years ago