Alternatives and similar repositories for Lidar_LD06_for_Arduino

Users that are interested in Lidar_LD06_for_Arduino are comparing it to the libraries listed below

• Reinbert / ros_esp32cam_robot
  This project is my attempt to control a cheap sweeping robot with an added servo using an esp32-cam micro controller and ROS.
  ☆19Updated 4 years ago
• ClemensAtElektor / Lidar-controlled-autonomous-vehicle
  2D-Lidar-controlled autonomous vehicle with ESP32 and Bluetooth
  ☆36Updated 4 years ago
• MS71 / ROS2Mower
  autonomous ROS2 lawn mower
  ☆10Updated 4 years ago
• adafruit / Adafruit_BNO08x
  Arduino library for BNO08x
  ☆74Updated 2 years ago
• cholan2100 / ceasar
  ☆18Updated 5 years ago
• ldrobotSensorTeam / ld19
  Stop the maintenance
  ☆11Updated 3 years ago
• fm4dd / pi-bno080
  Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux
  ☆19Updated 5 years ago
• jkirsons / BLDC-Driver-IFX007T
  ☆25Updated 4 years ago
• XRobots / OnmiSwerve
  ☆22Updated 4 years ago
• budryerson / TFLuna-I2C
  Arduino library for the Benewake TFLuna LiDAR distance sensor in the I2C communication mode
  ☆38Updated last year
• msadowski / x2_cartographer
  Using YDLIDAR X2 with Google Cartographer ROS package
  ☆17Updated 2 years ago
• rosmo-robot / Rosmo_ESC
  Dual brushless motor ESC in #M5Stack module format
  ☆30Updated 3 years ago
• PCrnjak / S-Drive-Firmware
  S_Drive is small bldc driver based on L6234 Three phase motor driver.
  ☆43Updated last year
• MAKER-ROS-TUTOR / AS5600_TEST
  ☆10Updated 3 years ago
• ZaneL / quaternion_sensor_3d_nodejs
  ☆36Updated 5 years ago
• husarion / rosbot-firmware-new
  [deprecated] ARM mbed based low-level firmware for ROSbot 2.0 for STM32F4 microcontroller
  ☆10Updated 4 years ago
• IS2511 / SCServo
  FeeTech SCS/SMS servo library for Arduino [not mine]
  ☆12Updated 4 years ago
• pgrady3 / EasyController2
  Simple BLDC motor controller
  ☆88Updated 2 years ago
• gouldpa / Triple-Cycloidal-Robot-Arm-Proto-2
  ☆23Updated 6 years ago
• wheelbot-tech / My_Gripper
  3d printed wifi gripper , MoveIt2, micro-ROS , esp32
  ☆12Updated 2 years ago
• adafruit / Adafruit_CircuitPython_BNO08x
  Helper library for the Hillcrest Laboratories BNO080 IMU
  ☆41Updated 3 months ago
• remrc / Two-Wheel-Balancing-Robot
  ☆19Updated 3 years ago
• ldrobotSensorTeam / ldlidar_stl_ros
  LDROBOT DTOF LiDAR ROS Package
  ☆34Updated 3 years ago
• remrc / Two-Axis-Reaction-Wheel-Stick
  ☆29Updated 3 years ago
• adafruit / Adafruit_CircuitPython_BNO055
  CircuitPython driver for BNO055 absolute orientation sensor
  ☆92Updated 7 months ago
• Saeterncj / QuadratureEncoder
  Arduino Quadrature Encoder
  ☆17Updated 6 years ago
• Framework-Robotics-GmbH / odrive-ros2-node
  ROS2-Node for ODrive
  ☆25Updated 3 years ago
• AlessioMorale / ld06_lidar
  ROS1 package for LDRobotic LD06 Lidar
  ☆39Updated 2 years ago
• sachin0x18 / rosserial_esp32
  rosserial on ESP32 based on ESP-IDF
  ☆43Updated 2 years ago
• curio-code / Self-Balancing-Stereo-Camera-Autonomous-Robot-ESP32
  A Self Balancing Robot with Stereo Camera setup based on ESP32 Platform.
  ☆17Updated 5 years ago