austin-bowen / lewansoul-servo-busLinks
Control Hiwonder/LewanSoul bus servos using Python 3
☆12Updated 3 years ago
Alternatives and similar repositories for lewansoul-servo-bus
Users that are interested in lewansoul-servo-bus are comparing it to the libraries listed below
Sorting:
- Raspberry PI library to control Hiwonder UART servos☆15Updated 2 years ago
- A simple robot car based on RP Pico and MicroPython☆14Updated 2 months ago
- ☆13Updated 3 months ago
- LDROBOT LiDAR SDK(NEW)☆12Updated last year
- Arduino library to support the VL53L7CX Time-of-Flight 8x8 multizone ranging sensor with 90 degrees FoV☆15Updated 2 months ago
- ☆9Updated 2 years ago
- A self balancing robot made with ESP32☆11Updated 10 months ago
- Dynamixel controller for AX-12A/W, XL-320 with IMU and BT☆12Updated last year
- Raspberry Pi Pico / RP2040 driver for the OKDO LIDAR_LD06 module☆12Updated last year
- Low cost lidar with black PCB☆9Updated 4 years ago
- ☆11Updated 3 years ago
- ⛔️ DEPRECATED MicroPythonMicroPython Driver for the TDK ICM20948 Accelerometer/Gyro Sensor☆12Updated 7 months ago
- Arduino code for the STEVAL-GMBL02V1 BLDC motorcontroller, using SimpleFOC to modulate the motors☆10Updated 3 years ago
- Firmware for the VSCP project☆29Updated 2 months ago
- Use a 2.7 waveshare eink screen with micropython☆14Updated last year
- Балансирующий робот на nodemcu☆10Updated 3 years ago
- MLX90640/41 python driver☆12Updated 4 years ago
- Qt implementation of I2C protocol for RaspberryPi along with some i2c sensors, in particular: TOF10120, VL53l1X, VL6180X, MPU6050, QMC588…☆10Updated 4 years ago
- This is a M5Stack grey (MPU6886 + BMM150 version) sample to calculate AHRS status.☆11Updated 4 years ago
- Differential Driving Robot with ESP32 and ODrive running micro-ROS☆13Updated 4 years ago
- A simple micropython i2c library for TF-Luna LiDAR Module.☆12Updated 4 years ago
- a low cost 3d lidar based on ydlidar-x4☆11Updated 4 years ago
- Google CartographerをYDLIDAR X4で動かす☆9Updated 6 years ago
- Some sketches for the VL53L5CX ranging camera for use with the Arduino IDE☆21Updated 3 years ago
- An adapter for DoIt ESP32 DevKit to fit into NodeMCU's V1.0 DIP socket☆14Updated 6 years ago
- ☆17Updated 4 years ago
- I came up with a design for a 3D printed Dynamic Spin Balancer using an ESP32, an MPU6050 and a hall sensor to help balance out my wheels…☆12Updated 3 years ago
- The differential drive has an ESP32 board for wireless connectivity a Client-Server network is established between the server laptop and …☆19Updated 3 years ago
- ☆10Updated 4 years ago
- This project is full functional implementation of wltoys v202 protocol,specified for rc cars A959, A969, A979 in micropython or esp32 i…☆9Updated 3 years ago