nickcoutsos / MPU-6050-Python
A Python module to handle the I2C communication between a Raspberry Pi and a MPU-6050
☆13Updated 2 years ago
Alternatives and similar repositories for MPU-6050-Python:
Users that are interested in MPU-6050-Python are comparing it to the libraries listed below
- I2C Drivers for MPU-9250, MPU-9255, MPU-9150, MPU-6500, MPU-6555, and MPU-6050☆77Updated 2 years ago
- Python examples of implementing Robot PID control☆32Updated 4 years ago
- MicroPython I2C driver for MPU9250 9-axis motion tracking device☆154Updated last year
- Calibration procedure for the MPU9250's accelerometer, gyroscope, and magnetometer using Python and a Raspberry Pi Computer☆108Updated 4 years ago
- Drivers for InvenSense inertial measurement units MPU9250, MPU9150, MPU6050☆266Updated 5 months ago
- ☆50Updated 5 years ago
- Visualizing MPU9250 3D orientation data on the web page hosted by ESP32☆85Updated 3 years ago
- MPU6050/9250 I2C and SPI interface. Sensor fusion using a complementary filter yields sensor Euler angles and is implemented in five diff…☆100Updated 2 years ago
- ☆70Updated 6 years ago
- ROS node for communicating with several models of commercially available IMUs over I2C in linux.☆53Updated 3 years ago
- Using an MPU6050 over I2C with Python on a BeagleBone Black☆58Updated 9 years ago
- Pythonifying the Adafruit BNO055 library to directly use the BNO055 on the Raspberry Pi connected through I2C.☆42Updated 6 years ago
- ☆28Updated last year
- A GUI tool for plotting and recording MPU-6050 digital accelerometer and gyroscope readings on a Raspberry Pi☆27Updated 6 years ago
- Python library for communication between raspberry pi and MPU9250 imu☆109Updated 2 years ago
- Raspberry Pi Python code for Kalman-filter Sensor Fusion with MPU-9250 or MPU-9265 sensor. I2C communication protocol forked from cityofe…☆31Updated 4 years ago
- Going Live☆89Updated last year
- A library for using the MPU6050 accelerometer and gyroscope module with Raspberry Pi to get both raw values and filtered angles on all ax…☆57Updated 3 years ago
- A Python module for accessing the MPU-6050 digital accelerometer and gyroscope on a Raspberry Pi.☆301Updated 3 years ago
- Libraries for use with GY91 10 dof board (MPU9250, MPU9255 and BMP280).☆57Updated 6 years ago
- CircuitPython driver for BNO055 absolute orientation sensor☆88Updated 2 months ago
- 9DOF Razor IMU available from SparkFun Electronics☆115Updated 5 years ago
- Arduino driver for PMW3901 optical flow sensor☆60Updated 2 years ago
- CircuitPython I2C driver for MPU9250 9-axis motion tracking device☆20Updated last year
- A two-wheeled self-balancing robot based on an Arduino micro controller and 12 V DC motors. A logic is implemented on top of a cascaded P…☆15Updated 2 years ago
- This is Kalman filter algorithm written in python language used to calculate the angle, rate and bias from the input of an accelerometer/…☆109Updated 6 months ago
- ☆58Updated 7 months ago
- Autonomous RC Car Project☆76Updated 5 years ago
- 9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)☆40Updated 8 years ago
- 9-dof, 10-dof and 11-dof IMU fusion library for Linux systems (development version)☆83Updated 2 years ago