lccasagrande / Automatic-StewartPlatformLinks
A project to automatically control a Stewart Platform using an IMU sensor, an Arduino and a library in C++ to perform all the Stewart control calculations.
☆47Updated 5 years ago
Alternatives and similar repositories for Automatic-StewartPlatform
Users that are interested in Automatic-StewartPlatform are comparing it to the libraries listed below
Sorting:
- Matlab GUI to calculate and visualize the inverse kinematics of a rotary stewart platform.☆90Updated 9 years ago
- Sponsored by Progressive Automations, completed by UBC Engineering Physics 2018 (Tim Branch, Henry Liu, Don Nguyen)/ (Matt Ward, Johnny L…☆35Updated 4 years ago
- Arduino Forward and Inverse Kinematics Library for Delta robot☆47Updated last year
- The RAW inverse kinematics library for Stewart Platforms written in JavaScript☆41Updated 3 months ago
- Repository for source codes for my implementation of a Stewart platform controlled by RC servos.☆93Updated 5 years ago
- Simulating a Stewart platform in Gazebo using a plugin to allow control of a closed loop manipulator with ROS.☆119Updated 6 years ago
- Math model for a fixed-rotary Gough-Stewart platform to allow the use of hobby servos to adjust the lengths of six parallel legs to achie…☆13Updated 8 years ago
- A toolbox to study Stewart platforms using Matlab/Simscape☆32Updated 5 years ago
- Quadruped using servos and computer vision for navigation☆59Updated 6 years ago
- Arduino Kinematics library for differential drive(2WD, 4WD) and mecanum drive robots.☆70Updated 6 years ago
- A ROS node that describes a quadruped robot using URDF☆84Updated 7 years ago
- Modern C++ implementation of forward and inverse kinematics for Stewart-Gough platforms☆25Updated 3 years ago
- A simple C++ SDK for interacting with ODrive☆29Updated 2 years ago
- Code to control multiple Dynamixel AX-12 servo motors over USART on an STM32F4 chip☆10Updated 10 years ago
- The turtlebot_arm package provides bringup, description, and utilities for using the TurtleBot arm.☆52Updated 4 years ago
- 一款基于ROS操作系统下的StewartPlatform的6自由度平台☆18Updated 4 years ago
- 12-DOF Quadruped Robot☆35Updated 3 years ago
- Analytical trapezoidal motion generator in Arduino and Matlab☆57Updated 3 years ago
- robot actuator☆32Updated 7 years ago
- 6 DOF design with Servo controller for use with FlyPT mover and AASD-15A drives☆15Updated 2 years ago
- MOCO通用四足机器人控制器教程☆118Updated 4 years ago
- The Stewart Platform simulation is a 3D model of a 6DOF robotic mechanism consisting of 6 linear actuators. It is used for motion control…☆71Updated 2 years ago
- Robotic quadruped☆45Updated 7 years ago
- UP board / rasperry pi to quad CAN Bus☆112Updated 5 years ago
- DSHOT communication with ESC using a teensy MCU☆44Updated 9 months ago
- Core software with ROS and MoveIt for the AR3 robotic arm☆121Updated 4 years ago
- ☆23Updated 10 years ago
- Manipulator robot based on BCN3DMOVEO with 6 degree of freedom (DOF) and user interface (GUI)☆57Updated 4 years ago
- Arduino PID motor position control☆38Updated 8 years ago
- High performance motor control☆18Updated 4 years ago